Adaptec 2244100-R User Guide - Page 47
support a maximum of 256 drives, including SSDs for details, see
![]() |
View all Adaptec 2244100-R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Chapter 5: Installing the Controller and Disk Drives ● 47 In a direct-attach connection, you connect SSDs directly to the controller with SAS cables (mini-SAS to SATA). In a backplane connection, use the appropriate cable for your backplane type (see page 45 for more about backplane connections). You can connect a maximum of eight MaxIQ-compatible SSDs to a controller. For RAID arrays, Adaptec RAID controllers support a maximum of 256 drives, including SSDs (for details, see page 17). Note: The following steps use an Adaptec MaxIQ SSD as an example but the procedure is suitable for any compatible SSD. 1 Install your Adaptec MaxIQ SSDs in your server. For servers with a standard 2.5-inch drive tray, install the SSD directly into the tray. If your server does not have a standard 2.5-inch drive tray, use a bracket or adapter which enables it to fit properly. Use a 2.5" to 3.5" adapter to install MaxIQ SSD if server does not have 2.5" tray. Typical MaxIQ SSD installation.
![](/manual_guide/products/adaptec-2270100r-user-guide-ba79576/47.png)