Adaptec 2244100-R User Guide - Page 48
Connecting External Devices, Next Steps, Creating a Bootable Array
View all Adaptec 2244100-R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Chapter 5: Installing the Controller and Disk Drives ● 48 2 Use an internal mini-SAS to SATA cable to attach the SSD(s) to the controller, as shown in the following example. Internal x4 mini-SAS connector To other SSDs Single-port connector MaxIQ SSD connected to controller with internal mini-SAS to SATA Fanout cable (SFF-8087 to 4x-SATA) 3 When all SSDs have been installed and connected, close your computer cabinet, reattach the power cord, then continue with Connecting External Devices on page 48. Connecting External Devices Note: If you are not connecting any external devices, see the following section, Next Steps. Use high-quality cables to connect your controller to your external device(s), such as disk drives or disk drive enclosures. We recommend using only Adaptec cables. For more information or to purchase cables, visit the Adaptec Web site at www.adaptec.com. Next Steps If you are installing the controller driver and an operating system onto a bootable array, continue with Creating a Bootable Array on page 49. If you are completing a standard installation onto an existing operating system, continue with Installing the Driver on an Existing Operating System on page 64.