Adaptec 2251300-R User Guide - Page 19

Chapter 2: Using the Command Line Utility ● 19 Parameters Controller# is the controller number BaseName is the name of the ROM image basename or the fully qualified name if you have a set of controller ROM images. Note: All UFI files must be in the same directory prior to invoking ARCCONF. If you are copying UFI files from floppy images, be sure to check all images. Example ARCCONF ROMUPDATE 1 AC2200 ARCCONF ROMUPDATE 1 AC220001.UFI arcconf setalarm Sets the state of the controller audible alarm, if present. Syntax ARCCONF SETALARM Parameters Controller# is the controller number On enables the alarm Off disables the alarm Silence quiets the currently sounding alarm Test triggers the alarm Example ARCCONF SETALARM 1 TEST ARCCONF SETALARM 1 SILENCE arcconf setcache Changes a logical drive's cache mode. Syntax ARCCONF SETCACHE LOGICALDRIVE [noprompt] SETCACHE DEVICE Parameters Controller# is the controller number LogicalDrive# is the number of the logical drive whose cache will be altered Logical drive cache modes: ● RON - read cache on ● ROFF - read cache off ● WT - write through disabled ● WB - write back enabled ● WBB - write back battery enabled (when protected by a battery) Channel/ID lists the space-delimited channel number and device number pairs for each device to add to the logical drive.