Adaptec 2251300-R User Guide - Page 26

Chapter 2: Using the Command Line Utility ● 26 hrconf restore Restores the controller configuration by importing it's configuration settings from a specified file. Deletes the current configuration. The file must have been saved through the BACKUP command from a controller of the same type, same number, and type of physical devices with same channels and device IDs. A reboot is required for the configuration change to take effect. Syntax HRCONF RESTORE [noprompt] Parameters Controller# is the controller number Filename is the name of the file to read the configuration from Example HRCONF RESTORE 1 C:\WINDOWS\HR2200 NOPROMPT hrconf romupdate Note: This command is only available on systems running Windows or Linux. Updates the controller or enclosure firmware. The ROM image file must be in the same directory prior to invoking hrconf. Syntax HRCONF ROMUPDATE [CONTROLLER] Parameters Controller# is the controller number Filename is the relative or absolute path with filename Channel# is the channel number for the device Device# is the device number for the drive Example HRCONF ROMUPDATE 1 CONTROLLER AS4830.UFI hrconf setboot Marks a logical device bootable. Syntax HRCONF SETBOOT 1 LOGICALDRIVE 1 Parameters Controller# is the controller number LogicalDrive# is the number of the logical drive to mark bootable Example HRCONF SETBOOT 1 LOGICALDRIVE 1