Adaptec 29320A-R User Guide - Page 133

Adaptec Ultra320 SCSI Cards User's Guide Error Messages The error messages listed below are the messages associated with the drivers. Messages are listed sequentially according to the last three digits of the error code. For example, [xxxxx020], [xxxxx021], [xxxxx022], and so forth. Note: When reporting problems to Customer Support, be sure to include the complete error code in your problem description. [xxxxx003] Command completed with error [xxxxx004] Command completed with error [xxxxx005] Command completed with error [xxxxx006] Command completed with error [xxxxx007] Command completed with error [xxxxx008] Command completed with error [xxxxx009] Command completed with error A request issued to a target device completed with an indication that there is an error. In most cases, the error is recovered and normal operation continues. [xxxxx010] Error issuing command An error has occurred while the driver was setting up its internal data structures. Try installing the most up-to-date version of the driver available from the Adaptec Web site. [xxxxx011] Error issuing command The requested command is not supported by this driver. [xxxxx012] Error issuing command The driver does not recognize the target device. [xxxxx013] Error issuing command [xxxxx014] Error issuing command An error has occurred while the driver was setting up its internal data structures. Try installing the most up-to-date version of the driver available from the Adaptec Web site. [xxxxx015] Error issuing command An error has occurred with the driver. Try installing the most upto-date version of the driver available from the Adaptec Web site. 11-12