Adaptec 29320A-R User Guide - Page 83

Installing the HostRAID Driver for Windows NT 4.0 6 The screen displays the adapter drivers supported on the disk. Select Adaptec HostRAID U320 driver for Windows NT 4.0 and press Enter. 7 If you want to add drivers (other than for HostRAID), press S and repeat Step 5 for each additional adapter and insert the appropriate disk provided by the hardware manufacturer. 8 Press Enter to continue with the Windows NT 4.0 operating system setup. Follow the instructions on-screen and in the Windows NT 4.0 documentation to complete the installation. Installing the Driver When Windows NT 4.0 is Already Installed To update or install the a320raid.sys driver if Windows NT 4.0 is already installed: 1 Start Windows NT 4.0. 2 Click the Start button on the Windows NT 4.0 task bar, and then point to Settings. 3 Click the Control Panel. 4 Double-click the SCSI Adapters icon. 5 Click the Drivers tab, then click the Add button. 6 In the Install Driver window, click the Have Disk button. 7 Insert the Adaptec HostRAID driver for Windows disk in your floppy disk drive. Enter the following path to the installation files, then click OK. a:\nt4 8 In the Install Driver window, Click OK. 9 You must restart your computer for the changes to take effect. Click Yes to restart your computer. 6-3