Adaptec 29320ALP-R Installation Guide - Page 10

Connecting Wide SCSI Devices, Connecting Internal Ultra/Fast Narrow Devices - scsi card r

Get Adaptec 29320ALP-R - SCSI Card Storage Controller U320 320 MBps PDF manuals and user guides
UPC - 760884155233
View all Adaptec 29320ALP-R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

English Connecting Wide SCSI Devices Connect internal Wide SCSI devices to the 68-pin internal SE Wide SCSI connector. To do this, use a 68-pin Wide SCSI cable like the one shown in Step 1 below. Follow these steps to connect the devices: 1 Locate a 68-pin internal Wide SCSI cable. 2 Plug one end of the cable to the Wide SCSI connector on the Adaptec SCSI Card 29320A. 3 Plug the other end of the cable to a terminated Ultra/Fast Wide SCSI device. 4 If you have other Ultra/Fast Wide SCSI devices, attach them to the connectors between the two ends of the cable. Be sure these other devices are unterminated. 5 Connect a power cable from your computer's internal power supply to each internal device. Connecting Internal Ultra/Fast Narrow Devices Connect internal Ultra/Fast Narrow SCSI devices that have standard 50-pin connectors to the 50-pin internal SE Narrow SCSI connector. To do this, use a 50-pin internal Ultra Narrow SCSI cable. Follow these steps to connect the devices: 1 Locate a 50-pin internal Ultra Narrow SCSI cable. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
7
English
Connecting Wide SCSI Devices
Connect internal Wide SCSI devices to the 68-pin internal SE Wide
SCSI connector. To do this, use a 68-pin Wide SCSI cable like the
one shown in Step 1 below. Follow these steps to connect the
devices:
1
Locate a 68-pin internal Wide SCSI cable.
2
Plug one end of the cable to the Wide SCSI connector on the
Adaptec SCSI Card 29320A.
3
Plug the other end of the cable to a
terminated
Ultra/Fast Wide
SCSI device.
4
If you have other Ultra/Fast Wide SCSI devices, attach them to
the connectors between the two ends of the cable. Be sure these
other devices are
unterminated
.
5
Connect a power cable from your computer’s internal power
supply to each internal device.
Connecting Internal Ultra/Fast Narrow Devices
Connect internal Ultra/Fast Narrow SCSI devices that have
standard 50-pin connectors to the 50-pin internal SE Narrow SCSI
connector. To do this, use a 50-pin internal Ultra Narrow SCSI
cable. Follow these steps to connect the devices:
1
Locate a 50-pin internal Ultra Narrow SCSI cable.