Adaptec 29320ALP-R Installation Guide - Page 11

Connecting External SCSI Devices, Ultra320/160 connectors on the Adaptec SCSI Card 29320A.

Page 11 highlights

2 Plug one end of the cable to the 50-pin internal SE Narrow SCSI connector on the Adaptec SCSI Card 29320A. 3 Plug the other end of the cable to a terminated Ultra/Fast Narrow SCSI device. 4 If you have other Ultra/Fast Narrow SCSI devices, attach them to the connectors between the two ends of the cable. Be sure these other devices are unterminated. 5 Connect a power cable from your computer's internal power supply to each internal device. Connecting External SCSI Devices You can connect external Ultra320/160 and Ultra2 SCSI devices to the 68-pin external LVD SCSI connector. Each external device will require a 68-pin LVD external LVD SCSI cable. Note: We recommend that you do not combine older SCSI devices with the newer Ultra320/160 and Ultra2 SCSI devices on the same SCSI channel of the Adaptec SCSI Card 29320A. Follow these steps to connect your external SCSI devices: 1 Connect one end of an external SCSI cable to one of the external Ultra320/160 connectors on the Adaptec SCSI Card 29320A. 68-pin external LVD SCSI connector External LVD SCSI cable 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83

8
2
Plug one end of the cable to the 50-pin internal SE Narrow SCSI
connector on the Adaptec SCSI Card 29320A.
3
Plug the other end of the cable to a terminated Ultra/Fast
Narrow SCSI device.
4
If you have other Ultra/Fast Narrow SCSI devices, attach them
to the connectors between the two ends of the cable. Be sure
these other devices are
unterminated
.
5
Connect a power cable from your computer’s internal power
supply to each internal device.
Connecting External SCSI Devices
You can connect external Ultra320/160 and Ultra2 SCSI devices to
the 68-pin external LVD SCSI connector. Each external device will
require a 68-pin LVD external LVD SCSI cable.
Note:
We recommend that you do not combine older SCSI
devices with the newer Ultra320/160 and Ultra2 SCSI devices
on the same SCSI channel of the Adaptec SCSI Card 29320A.
Follow these steps to connect your external SCSI devices:
1
Connect one end of an external SCSI cable to one of the external
Ultra320/160 connectors on the Adaptec SCSI Card 29320A.
68-pin external
LVD SCSI connector
External LVD SCSI
cable