Adaptec AVA-2902E Installation Guide - Page 3
Step 4, Step 5, Step 6, Congratulations - ava 1
View all Adaptec AVA-2902E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Step 4: Plug one end of the internal SCSI cable into the host adapter's SCSI connector. Be sure the colored stripe on the cable is aligned with Pin 1 (the v mark) on the connector. The host adapter's internal connector is keyed to ensure that the cable is plugged in correctly. Colored Stripe (typically blue or red) 50-pin SCSI Ribbon Cable Internal SCSI Connector Pin 1 Key Step 5: Plug the other end of the cable into the internal SCSI device. Then connect a DC power cable from your PC's power supply to the power input connector on the internal SCSI device DC Power Cable (from PC Power Supply) 50-pin SCSI Ribbon Cable Step 6: Replace the PC cover, reconnect the power cord, and turn ON the PC. Congratulations! You have physically installed the host adapter and the internal SCSI device. You may need to install host adapter drivers and other software before you can use the device. For more information, see the device manufacturer's instructions and see Installing Device Drivers on page 4. 2 AVA-2902E/I Installation Guide Part Number: 511444-00, Rev. A Print Spec Number: 496495-00 Current Date: 3/26/97 ECN Date: 4/2/97