Airlink AIC250W User Manual - Page 13
Step 11, Step 12 - wireless
View all Airlink AIC250W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Step 11 If you need to change the Camera's IP Address because another network device is already using the same address, you can assign a new address here and click Next. Step 12 Enter the Network Name (SSID) of your access point / wireless router in the SSID field and select the encryption setting of your wireless network (None / WEP / WPA-PSK) from the Security Mode drop-down menu and click Next. Note: If you do not have wireless encryption enabled, you may skip to Step 14. 13
13
Step 11
If you need to change the Camera’s IP Address because another network
device is already using the same address, you can assign a new address here and click
Next
.
Step 12
Enter the
Network Name (SSID)
of your access point / wireless router in the
SSID
field and select the encryption setting of your wireless network (
None / WEP /
WPA-PSK
) from the
Security Mode
drop-down menu and click
Next
.
Note:
If you do not have wireless encryption enabled, you may skip to
Step 14
.