Airlink ASW324 Quick Installation Guide - Page 4
Installing the Switch, 1 Installation, 2 Desktop or Shelf Installation, 3 Rack Installation
View all Airlink ASW324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
• Fast Ethernet: 2-pair UTP Cat. 5, Twisted Pair (UTP) Ports • 24 x 10/100Mbps TX Auto-Negotiation RJ45 Port Access Method • CSMA/CD Transmission Method • Store and Forward MAC Address Table • 8K Built-in Buffer • 1.25M bits Data Transfer Rate** • Ethernet: 10/20Mbps - Half/Full-Duplex • Fast Ethernet: 100/200Mbps - Half/Full Duplex Physical and Environmental • Power Input: 100~240V AC, 50~60Hz • Operation Temperature: 0 °C ~ 50°C • Storage Temperature: -20°C ~ 70°C • Humidity: 5% ~ 90% RH, non-condensing 6 2 Installing the Switch The site where you place the switch may greatly affect its performance. When installing, take the following into your consideration. 2.1 Installation Follow the guidelines below to install the Switch: Install the Switch in a fairly cool and dry place. See the Technical Specifications for the acceptable temperature and humidity operating ranges. Install the Switch on a sturdy, level surface that can support its weight. Connect the power cord to the Switch and the power outlet. The distance is no more than 182cm. Leave at least 10cm (about 4 inches) of space at the front and rear of the Switch for ventilation. 2.2 Desktop or Shelf Installation When installing the Switch on the desktop or shelf, please attach the rubber feet to the Switch. Peel off the protective paper on the pads and attach them on the bottom of the Switch (one at each corner). 2.3 Rack Installation The Switch is rack-mountable and can be installed on an EIA 7