Airlink ASW408POE Quick Installation Guide - Page 3

LED Power Color Green Status Solid Off Power output to PoE devices has reached When the system is or surpassed the using less than 38W max. power • PoE 1~4 LEDs LED Color PoE 1~4 Green Solid PoE devices connected successfully Status Off PoE port failed, possibly due to: power shortage, over the power current or power adapter out of DC 44 ~ 57V • LAN 1~8 LEDs LED LAN 1~8 Color Green Solid Connected to 100M network Status Blinking Transmitting/ Receiving data on 100M network Off Connected to 10M network or no device is connected 1.3 Technical Specifications Standards • IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX and IEEE 802.3x Flow Control, IEEE 802.3af (PoE) Ports • 8 x 10/100Mbps TX Auto-Negotiation RJ45 Port with 4 PoE ports Access Method 4 • CSMA/CD Transmission Method • Store and Forward MAC Address Table • 1K Built-in Buffer • 768K bits Data Transfer Rate** • Ethernet: 10/20Mbps - Half/Full-Duplex • Fast Ethernet: 100/200Mbps - Half/Full Duplex PoE Budget • Up to 15.4W max. per PoE port, 30W total PoE Power on RJ45 • Power + : ping 3 & ping 6 • Power - : ping 1 & ping 2 Power Consumption • 6.3 watts. (max. no PD device connected) • 36.3 watts (max. with 30W PoE device connected) Physical and Environmental • Power Adapter: 48 DC / 0.8A, 100~240V AC, 50~60Hz 1.2A • Operation Temperature: 0 °C ~ 50°C • Storage Temperature: -20°C ~ 70°C • Humidity: 5% ~ 90% RH, non-condensing 2. Installing the Switch The site where you place the switch may greatly affect its performance. When installing, take the following into your consideration. 2.1 Installation The setup of the switch can be performed using the following steps: 5