Airlink ASW408POE Quick Installation Guide - Page 4

• Visually inspect the DC jack and make sure that is fully secured to the power adapter • Make sure that there is proper heat dissipation and adequate ventilation around the Switch. Do not place heavy objects on the Switch. 2.2 Desktop or Shelf Installation When installing the Switch on the desktop or shelf, please attach the rubber feet to the Switch. Peel off the protective paper on the pads and attach them on the bottom of the Switch (one at each corner). 3. Connecting the Switch This section describes how to connect the Switch to your network. 3.1 Connection The Switch supports 8 10/100Mbps Ethernet ports and Port 1 ~ Port 4 are PoE Enabled ports. These PoE port will automatically activate when a compatible terminal is identified. The Switch will supply power through the Ethernet port to the connected PoE powered device (PD). For legacy devices that are not compatible, the PoE port will not offer power to this device. This feature allows users to freely and safely mix legacy and PoE devices on their network. The Switch supports 10Mbps Ethernet or 100Mbps Fast Ethernet and it runs both in half and full duplex mode using two pair of Category 5 cable. These RJ45 ports are Auto-MDI type port. The Switch can auto negotiate the MDI-II or MDI-X type, so you can connect any RJ-45 cable regardless if it is a standard or crossover cable. 6 Technical Support E-mail: [email protected] Web Site: www.airlink101.com *Network conditions and environmental factors as well as network overhead lower actual data throughput rate. Specifications are subject to change without notice. Photo of product may not reflect actual content. Copyright © 2010 AirLink101. All rights reserved. AirLink101, the stylized AirLink101 logo, specific product designations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of AirLink101. All other product or service names are the property of their respective holders. AirLink101 products are protected under numerous U.S. and foreign patents and pending applications, mask work rights, and copyrights. 7