Alcatel OS6850-48 User Guide - Page 28

OmniSwitch 6850-48L OmniSwitch 6850 Series Chassis and Hardware Components Refer to the illustration below for more front panel information. For detailed LED descriptions, refer to page 2-53. For information on the chassis rear panel, refer to page 2-55. Status and Slot Indicator LEDs For detailed information on OS6850-48L status and slot indicator LEDs, refer to page 2-53. USB Port High speed USB port, which can be used for quick upgrades. 10/100Mbps and 10/100/1000 Mbps The OS6850-48L provides 44 fixed 10/100BaseT (5-48) and 4 fixed 10/100/1000BaseT combo (1-4). These are auto-sensing and auto-MDIX and use RJ-45 connectors. OmniSwitch 6850-48L USB OK PRI PWR BPS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 Console 1 2 3 4 CLASS 1 LASER PRODUCT Console Port The OS6850-48L front panel provides one RJ-45 port for console connections. Console connections are used by network administrators for switch management. This female RJ-45 connector provides a DTE console connection. Combo SFP The OS6850-48L provides four combo SFP connectors for 1000Base-X high- speed connections. By default, when an SFP is installed in a combo port, it takes over the port number of the corresponding RJ-45 Ethernet port. In other words, if an SFP is installed in the slot labeled 4, Ethernet port 4 would no longer be available and cannot be used for 10/100/1000 traffic. This default setting is referred to as "preferred fiber." Refer to "Configuring Ethernet" in the Network Configuration Guide for detailed information, including steps for configuring combo port settings. OmniSwitch 6850-48L Front Panel page 2-8 OmniSwitch 6850/6850E Series Hardware Users Guide June 2011