Alcatel OS6850-48 User Guide - Page 84
Redundant Connection Between Top and Bottom Switches, Tightening Stacking Connector Captive Screws
View all Alcatel OS6850-48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Setting Up a Stacked Configuration OmniSwitch 6850 Series Chassis and Hardware Components 5 To provide added resiliency and redundancy, you must install the redundant stacking cable to connect the top switch in the stack to the bottom switch. Connect the redundant cable now. Refer to the diagram below for more information: Redundant Connection Between Top and Bottom Switches 6 Once all stacking cable connectors are inserted, tighten the captive screws at the left- and right-hand sides of each connector as shown. Be sure not to overtighten the screws. Tightening Stacking Connector Captive Screws 7 Now that all switches in the stack are connected, continue to "Booting OmniSwitch 6850 Series Switches" on page 2-65. page 2-64 OmniSwitch 6850/6850E Series Hardware Users Guide June 2011