Alpine 9886M Owners Manual - Page 10
Radio - bluetooth
UPC - 793276711533
View all Alpine 9886M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
01GB00CDA9886M.book Page 8 Monday, March 17, 2008 4:05 PM RESET switch Radio Rotary encoder SOURCE/ BAND // TUNE/A.ME /ENT Adjusting Volume Turn the Rotary encoder until the desired sound is obtained. Lowering Volume Quickly Activating the Audio Mute function will instantly lower the volume level by 20 dB. Press MUTE to activate the MUTE mode. The audio level will decrease by about 20 dB. Pressing MUTE again will bring the audio back to its previous level. Setting the Time and Calendar 1 Press and hold F/SETUP for at least 2 seconds to activate the SETUP selection mode. 2 Turn the Rotary encoder to select the General mode, and then press /ENT. Bluetooth*1 HD Radio*4 General Display Bluetooth XM*2/SIRIUS*3 *1 Displayed only when INT Mute is OFF and the mode is set to other than Bluetooth Audio. *2 Only when XM Radio is connected. *3 Only when SIRIUS Radio is connected. *4 Only when HD Radio is connected. 3 Turn the Rotary encoder to select Clock Adjust, and then press /ENT. 4 Turn the Rotary encoder to set year. 5 Press /ENT. 6 Repeat steps 4 and 5 above to set month, day, hour and minute. 7 Press and hold F/SETUP for at least 2 seconds to return to normal mode. • Pressing /ESC returns to the previous SETUP mode. • If no operation is performed for 60 seconds, SETUP is canceled. • To synchronize the clock to another clock/watch or radio time announcement, press and hold /ENT for at least 2 seconds after setting the "hour". Minutes will reset to 00. If the display shows over "30" minutes when you do this, the time will advance one hour. /ESC Preset buttons (1 through 6) This unit cannot receive HD Radio signals (digital terrestrial radio). In order to activate the digital radio functions described below, an optional HD Radio Tuner module must be connected through the Ai-NET bus. Listening to Radio 1 Press SOURCE/ to select TUNER mode. 2 Press BAND repeatedly until the desired radio band is displayed. FM1 FM2 AM FM1 3 Press TUNE/A.ME to select the tuning mode. DX (Distance mode) LOCAL (Local mode) MANUAL (Manual mode) DX • The initial mode is Distance mode. Distance mode: Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning). Local mode: Only strong stations will be automatically tuned in (Automatic Seek Tuning). Manual mode: The frequency is manually tuned in steps (Manual tuning). 4 Press or to tune in the desired station. Holding down or will change the frequency continuously. • If Digital Seek is set to ON, the SEEK UP/DOWN functions only stop on digital station frequencies while receiving HD radio. Refer to "Digital Seek ON/OFF Setting" (page 21). 8-EN 01GB05CDA9886.fm ALPINE CDA-9886M 68-12118Z86-A (EN)