Alpine 9886M Owners Manual - Page 48

01GB00CDA9886M.book Page 46 Monday, March 17, 2008 4:05 PM Removal 1. Remove the detachable front panel. 2. Insert the bracket keys into the unit, along the guides on either side. The unit can now be removed from the mounting sleeve. This unit Bracket keys (Included) 3. Pull the unit out, keeping it unlocked as you do so. This unit Ground Lead *3 Front Frame Screws (M5 × 8) (Included) Mounting Bracket • Secure the ground lead of the unit to a clean metal spot using a screw (*3) already attached to the vehicle's chassis. USB memory Connection (sold separately) Connect USB memory Connect USB memory to USB cable. This unit USB connector USB memory (sold separately) Cable (sold separately) Remove USB memory Pull out USB memory squarely from the USB cable. This unit USB memory USB connector (sold separately) Cable (sold separately) • When removing USB memory, pull it out straight. • If sound is not output or USB memory is not recognized even when USB memory is connected, remove USB memory once, then connect it again. • Change to a source other than the USB memory mode, then remove the USB memory. If the USB memory is removed in the USB memory mode, data may be damaged. • Route the USB cable away from another cables, etc. 46-EN 01GB06CDA9886.fm ALPINE CDA-9886M 68-12118Z86-A (EN)