Alpine 9886M Owners Manual - Page 24
SAT Radio Receiver, Optional - remote
UPC - 793276711533
View all Alpine 9886M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
01GB00CDA9886M.book Page 22 Monday, March 17, 2008 4:05 PM SAT Radio Receiver (Optional) SOURCE/ Rotary encoder BAND / /ENT 3 Press or to select desired category. 4 Press or to select the desired channel. Holding down or will change channels continuously. • When using the optional remote control (RUE-4190, etc.), an SAT Radio Channel can be directly called up with the numeric keypad of the remote control. 1 While in XM or SIRIUS Radio mode, enter the Channel number you want to call up with the numeric keypad on the remote control. 2 Press Enter on the remote control within 5 seconds to receive the Channel. VIEW F/SETUP Preset buttons /ESC (1 through 6) SAT Receiver: XM or SIRIUS Receiver When an optional XM or SIRIUS Receiver Box is connected via the Ai-NET bus, the following operations may be performed. However, the XM Receiver and SIRIUS Receiver cannot be connected at the same time. SIRIUS Receiver: Verify the features of the connected SIRIUS Receiver Box. Not all SIRIUS Receivers have identical functions and some may not be performed on this unit. For details about functions, refer to the SIRIUS Receiver's Owner's Manual. Receiving Channels with the SAT Radio Receiver (Optional) About SAT Radio Satellite Radio* is the next generation of audio entertainment, with over 100 digital audio channels. For a small monthly fee, subscribers can hear crystal-clear music, sports, news and talk, coast-to-coast via satellite. For more information, visit XM's website at www.xmradio.com, or SIRIUS' website at www.sirius.com. To receive SAT Radio, the separately sold XM Direct™ or SIRIUS Satellite Radio Tuner and an appropriate Ai-NET Interface Adapter will be required. For details, consult you nearest Alpine dealer. * XM and its corresponding logos are trademarks of XM Satellite Radio Inc. * SIRIUS and its corresponding logos are trademarks of SIRIUS Satellite Radio Inc. • The SAT Receiver controls on this unit are operative only when a SAT Receiver is connected. 1 Press SOURCE/ to activate the SAT Radio mode. 2 Press BAND to select one of the three SAT Radio Preset Bands. Each press changes the band: XM mode: XM 1 XM 2 XM 3 XM 1 SIRIUS mode: SIRIUS 1 SIRIUS 2 SIRIUS 3 SIRIUS 1 Checking the SAT Radio ID Number A unique Radio ID number is required to subscribe to SAT Radio programming. Each third party XM or SIRIUS radio comes with this number. This number is an 8 character (for XM Radio) or 12 character (for SIRIUS Radio) alphanumeric number. It is printed on a label found on the SAT Receiver. It can also be displayed on the screen of this unit in the following way. XM: 1 While receiving a SAT Radio band, press or to select channel "0" for XM. The unit alternately displays channel No. "0" for 2 seconds, then the ID number is displayed. Demonstration (page 21) becomes nonfunctional. 2 To cancel the ID number display, select the channel other than "0." SIRIUS: 1 While receiving a SAT Radio band, press or to select channel "255" for SIRIUS. 2 Press VIEW until the ID No. appears in the display. Category Name Channel No./Channel Name (Blank) (Blank) Calendar Clock ID No. * ID No. * Composer Name ID No. Category Name Channel No./Channel Name 3 To cancel the ID number display, select the channel to other than "255". • You cannot use "O", "S", "I", or "F" for the ID Number (XM radio Receiver only). • You can check the ID number printed on a label on your third party, SAT Radio Receiver package. * When the "Text Scroll" (page 21) is set to "Auto," the display cannot be switched by pressing VIEW. The display contents switch alternately. 22-EN 01GB05CDA9886.fm ALPINE CDA-9886M 68-12118Z86-A (EN)