Alpine B211A Owners Manual - Page 14

SAT Radio Receiver, Operation Optional

Page 14 highlights

SAT Radio Receiver Operation (Optional) SOURCE 8 g 9 TITLE BAND/PRESET f :/J/SEARCH 3 Press -/J/SEARCH to select CH NAME or CH NO. CH NO. → CH NAME → CATEGORY → CH NO. CH NO. : channel number tuning CH NAME : channel name tuning 4 Press g or f to select the desired channel. Holding down g or f will change channels continuously. • When using the optional remote control (RUE-4190), a SAT Radio Channel can be directly called up with the numeric keypad of the remote control. 1 While in XM or SIRIUS Radio mode, enter the Channel number you want to call up with the numeric keypad on the remote control. 2 Press ENTER on the remote control within 5 seconds to receive the Channel. If the channel number is 3 digits, the Channel is automatically received after the channel number is input. SAT Receiver: XM or SIRIUS Receiver When an optional XM or SIRIUS Receiver Box is connected via the Ai-NET bus, the following operations may be performed. However, the XM Receiver and SIRIUS Receiver cannot be connected at the same time. Receiving Channels with the SAT Radio Receiver About SAT Radio Satellite Radio* is the next generation of audio entertainment, with over 100 digital audio channels. For a small monthly fee, subscribers can hear crystal-clear music, sports, news and talk, coast-to-coast via satellite. For more information, visit XM's website at www.xmradio.com., or SIRIUS' website at www.sirius.com. To receive SAT Radio, the separately sold XM Direct™ or SIRIUS Satellite Radio Tuner and an appropriate Ai-NET Interface Adapter will be required. For details, consult your nearest ALPINE dealer. * XM and its corresponding logos are trademarks of XM Satellite Radio Inc. * Sirius and its corresponding logos are trademarks of Sirius Satellite Radio Inc. • The SAT Receiver controls on the VPA-B211A are operative only when a SAT Receiver is connected. 1 Press SOURCE to select SAT Radio mode. 2 Press BAND/PRESET to select between one of the three SAT Radio Preset Bands. Each press changes the band: XM mode: XM1 → XM2 → XM3 → XM1 SIRIUS mode: SIRIUS1 → SIRIUS2 → SIRIUS3 → SIRIUS1 Tuning in to Categorized Programs You can listen to programs categorized to the same group one after another. 1 In the XM or SIRIUS mode, press -/J/SEARCH to select CATEGORY mode. CH NO. → CH NAME → CATEGORY → CH NO. 2 Press g or f to select a desired category. Holding down g or f will change categories continuously. The first channel of the selected category is tuned. Checking the SAT Radio ID Number A unique Radio ID number is required to subscribe to SAT Radio programming. Each third party XM or SIRIUS radio comes with this number. This number is an 8 character (for XM Radio) or 12 character (for SIRIUS Radio) alphanumeric number. It is printed on a label found on the SAT Receiver. It can also be displayed on the screen of the VPA-B211A in the following way. 1 Press -/J/SEARCH to select CH NO. 2 While receiving band, press g or f to select channel "0." The unit displays the ID number. 3 To cancel the ID number display, set the channel to other than "0." • You cannot use "O," "S,"" I," or "F" for the ID Number (XM radio Receiver only). • You can check the ID number printed on a label on your third party, SAT Radio Receiver package. 13-EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29

13
-EN
SAT Radio Receiver
Operation (Optional)
SAT Receiver:
XM or SIRIUS Receiver
When an optional XM or SIRIUS Receiver Box
is connected via the Ai-NET bus, the following
operations may be performed. However, the XM
Receiver and SIRIUS Receiver cannot be
connected at the same time.
Receiving Channels with the SAT
Radio Receiver
About SAT Radio
Satellite Radio* is the next generation of audio entertainment, with
over 100 digital audio channels. For a small monthly fee, subscribers
can hear crystal-clear music, sports, news and talk, coast-to-coast via
satellite. For more information, visit XM’s website at
www.xmradio.com., or SIRIUS' website at www.sirius.com.
To receive SAT Radio, the separately sold XM Direct™ or
SIRIUS Satellite Radio Tuner and an appropriate Ai-NET
Interface Adapter will be required. For details, consult your
nearest ALPINE dealer.
*
XM and its corresponding logos are trademarks of XM
Satellite Radio Inc.
*
Sirius and its corresponding logos are trademarks of Sirius
Satellite Radio Inc.
The SAT Receiver controls on the VPA-B211A are
operative only when a SAT Receiver is connected.
1
Press
SOURCE
to select SAT Radio mode.
2
Press
BAND/PRESET
to select between one
of the three SAT Radio Preset Bands.
Each press changes the band:
XM mode:
XM1
XM2
XM3
XM1
SIRIUS mode:
SIRIUS1
SIRIUS2
SIRIUS3
SIRIUS1
3
Press
-
/
J
/
SEARCH
to select CH NAME or
CH NO.
CH NO.
CH NAME
CATEGORY
CH NO.
CH NO. : channel number tuning
CH NAME : channel name tuning
4
Press
g
or
f
to select the desired
channel.
Holding down
g
or
f
will change channels
continuously.
When using the optional remote control (RUE-4190), a
SAT Radio Channel can be directly called up with the
numeric keypad of the remote control.
1
While in XM or SIRIUS Radio mode, enter the
Channel number you want to call up with the
numeric keypad on the remote control.
2 Press
ENTER
on the remote control within 5 seconds to
receive the Channel.
If the channel number is 3 digits, the Channel is
automatically received after the channel number is input.
Tuning in to Categorized Programs
You can listen to programs categorized to the same group one
after another.
1
In the XM or SIRIUS mode, press
-
/
J
/
SEARCH
to select CATEGORY mode.
CH NO.
CH NAME
CATEGORY
CH NO.
2
Press
g
or
f
to select a desired
category.
Holding down
g
or
f
will change categories
continuously.
The first channel of the selected category is tuned.
Checking the SAT Radio ID Number
A unique Radio ID number is required to subscribe to SAT
Radio programming. Each third party XM or SIRIUS radio
comes with this number.
This number is an 8 character (for XM Radio) or 12 character
(for SIRIUS Radio) alphanumeric number. It is printed on a
label found on the SAT Receiver.
It can also be displayed on the screen of the VPA-B211A in
the following way.
1
Press
-
/
J
/
SEARCH
to select CH NO.
2
While receiving band, press
g
or
f
to
select channel “0.”
The unit displays the ID number.
3
To cancel the ID number display, set the
channel to other than “0.”
You cannot use “O,” “S,”“ I,” or “F” for the ID Number
(XM radio Receiver only).
You can check the ID number printed on a label on your
third party, SAT Radio Receiver package.
SOURCE
8
9
g
f
:
/
J
/SEARCH
BAND/PRESET
TITLE