Alpine B211A Owners Manual - Page 19

To activate your auxiliary devices: To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below. 1. Bring your vehicle to a complete stop at a safe location. Engage the parking brake. 2. Keep pushing the foot brake and release the parking brake once then engage it again. 3. When the parking brake is engaged for the second time, release the foot brake. • For automatic transmission vehicles, place the transmission lever in the Park position. Now, the locking system for the AUX mode operation has been released. Engaging the parking brake can reactivate the AUX mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3), of "To activate your auxiliary devices." Each time the ignition is turned OFF, perform the procedure of "To activate your auxiliary devices." • If you try to activate the auxiliary device while driving, the display will show the warning-PICTURE OFF FOR YOUR SAFETY. 1 Press SOURCE to activate the AUX mode. The external input screen is displayed. 2 Press BAND/PRESET to change to the AUX mode.*1 AUX-1 → AUX-2 → AUX-3*2 → AUX-1 *1 AUX-1 to AUX-3 are displayed if AUX IN set to ON in "Setting the AUX mode" (page 8), or the name which is given as the source name in "Naming External Devices" on page 8 is displayed. *2 AUX-3 is displayed when the optional expansion box (VPE-S431) is connected. TV Operation (Optional) SOURCE 8 g 9 BAND/PRESET f :/J/SEARCH When connected with an ALPINE TV unit (sold separately), you can use the remote control supplied with the VPA-B211A to operate the TV. Set the AUX NAME to TV. Refer to "Naming External Devices" page 8. • TV is connected to AUX IN-2. • When the optional expansion box (VPE-S431) is con- nected, connect TV to AUX IN-3. • Be sure to connect this unit or VPE-S431 remote control output lead to the TV unit's remote control input lead. Operating TV Unit WARNING It is dangerous (and illegal in many states) for the driver to watch the TV while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur. Install the VPA-B211A correctly so that the driver cannot watch TV unless the vehicle is stopped and the emergency brake is applied. If the VPA-B211A is not installed correctly, the driver will be able to watch the TV while driving the vehicle and may be distracted from looking ahead and cause an accident. The driver or other people could be severely injured. 18-EN