Alpine B211A Owners Manual - Page 22

Indication for iPod Mode NO iPod • The iPod is not connected. - Make sure the iPod is correctly connected. Make sure the cable is not bent excessively. • The iPod's battery remains low. - Refer to the iPod's documentation and charge the battery. NO SONG • There are no songs in the iPod. - Download songs to the iPod and connect to the KCA420i. ERROR • Communication error - Turn the ignition key off, and then set to ACC or ON again. - Check the display by reconnecting between the iPod and the adapter, using the iPod cable. • Caused by the iPod Software Version not being compatible with the optional adapter KCA-420i. - Refer to the Owner's Manual of the optional adapter KCA-420i, and update the iPod Software Version to be compatible with the optional adapter KCA-420i. Indication for AUX Mode I/F BOX ERROR (AUX3 mode only) • The optional expansion box (VPE-S431) is not correctly connected. - Make sure the VPE-S431 is correctly connected, and the cable is not bent excessively. Specifications External dimensions Wide Height Depth Weight 180 mm (7-1/8") 35 mm (1-3/8") 160 mm (6-1/4") 0.75 kg (1lb 10 oz) Installation Velcro fastener Mounting When mounting the unit with the Velcro fasteners, be sure to choose a flat location. Do not hang the unit from the bottom of the dashboard or rear deck with the Velcro fasteners. 1 Remove the protective paper and attach two pieces of velcro fastener to the bottom of the VPA-B211A. Protective paper Protective paper Velcro Fasteners (Included) 2 Check the position, and then fix the VPA- B211A to the floor carpet. Screw-down Mounting 1 Using the adapter as a template, hold it in the mounting location and mark the holes to be drilled. Before drilling, make sure that there are no objects that could be damaged behind the mounting surface. 2 Drill holes and secure the adapter with the self-tapping screws (M4 × 14) supplied. 21-EN