Alpine CDE-133BT Cde-133bt Owner's Manual (english) - Page 21
Setting the Visible Mode - microphone
View all Alpine CDE-133BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
2 Turn the Rotary encoder to select "CONNECT" to connect the selected device. The connected device is marked with "l". Select "DISCONNECT" to disconnect this device. Select "CLEAR" when you want to clear the device from the device list. Notes • If the connection is successfully changed, "CONNECTED" is displayed for 2 seconds and the indicator lights up, then the display returns to the SETUP screen. • If a mobile phone is connected to this unit successfully, the c indicator lights up to show the battery quantity of the connected mobile phone. The j indicator lights up when the battery quantity is in middle level, and it blinks in low level. • Indicator i (Signal Strength): The indicator will display the current signal strength of mobile phone. The indicator blinks when the signal of the connected mobile phone is weak. • Depending on the connected mobile phone, the c (battery quantity), i (signal strength) and h (message) indicators may not be displayed. • If all the 3 positions have been registered, you cannot register the 4th device. To register another device, you need to delete one of the devices from position 1 to 3 first. Setting the Visible Mode You can set whether this unit can be recognized or not from a BLUETOOTH compatible device. Normally set this to VISI M ON. Setting item: VISIBLE M Setting contents: VISI M OFF / VISI M ON (Initial setting) VISI M OFF: Disable recognition of this unit from the BLUETOOTH compatible device. VISI M ON: Enable recognition of this unit from the BLUETOOTH compatible device. Pairing a BLUETOOTH Device from the unit The BLUETOOTH device is used when a connectable BLUETOOTH compatible device is searched and connected to this unit, or when a new BLUETOOTH compatible device is registered. Setting item: SEARCH DEV 1 When SEARCH DEV is selected, and "SEARCHING" is displayed, the search gets started. Note • The "SEARCHING" operation can be stopped by pressing . 2 Turn the Rotary encoder to select the name of the device to be connected from the Device Search list and then press ENTER. 3 If this unit is successfully connected to a BLUETOOTH compatible device, "CONNECTED" is displayed, and then the unit returns to normal mode. Depending on the mobile phone, it may be necessary to input a passcode. In this case, "CODE 0000" is displayed. Input the passcode "0000" in the BLUETOOTH compatible device to make the pairing. After the pairing is completed, the unit will automatically connect to the BLUETOOTH compatible device. If you input the wrong passcode or the communication fails, "FAILED" is displayed. Setting the BLUETOOTH sound quality You can flexibly customize the sound of call to fit your own preferences. Setting item: CALL SOUND Further setting items: VOL LV ADJ / AUTO SET Adjusting the volume (VOL LV ADJ) You can emphasize or weaken the volume level of the Phone call, the ring tone and the microphone input to fit your own preferences. Setting contents: PHONE TALK: -5 dB~ +5 dB RING TONE: -5 dB~ +5 dB MIC GAIN: -5 dB~ +5 dB Note • These setting items are the same as PHONE TALK, RING TONE and MIC GAIN settings in AUDIO step mode, refer to "Setting the Source Volume Level" on page 15. Sound Auto setting (AUTO SET) This unit provides 5 methods to improve the sound quality of calling. You can choose the type according to your own preference. Setting contents: TYPE1 (Initial setting) / TYPE2 / TYPE3 / TYPE4 / TYPE5 TYPE1: Standard Mode (recommended) TYPE2: Enhance the noise reduction TYPE3: Enhance the echo-cancel TYPE4: Enhance both noise reduction and echo-cancel TYPE5: Weaken both noise reduction and echo-cancel Notes • The functions below are designed to improve the sound quality of the caller to driver. Noise reduction: This function can reduce the road noise, but excessive enhancement may affect the sound quality of calling. Echo-cancel: This function can reduce the echo noise, but excessive enhancement may affect the sound quality of calling. • Improvement effect differs depending on the actual calling environment, so please choose a suitable type accordingly. Setting the caller information display/ text message indicator ON/OFF You can choose whether to use these functions according to the following setting. Setting item: SENDER ID Further setting items: MSG ALERT / CALLER ID Setting contents: OFF / ON (Initial setting) 21-EN