Alpine CDE-133BT Cde-133bt Owner's Manual (english) - Page 31

Indication for iPod Mode • Mechanism error. 1 Press the  button and eject the CD. If not ejecting, consult your Alpine dealer. 2 When the error indication remains after ejecting, press the  button again. If the error indication still does not turn off after pressing the  button for a few times, consult your Alpine dealer. • When "ERROR" is displayed: If the disc cannot be ejected by pressing , press the RESET button (refer to "Initial System Start-Up" on page 8) and press  again. If the disc still cannot be ejected, consult your Alpine dealer. • The iPod/iPhone is not connected. - Make sure the iPod/iPhone is correctly connected (refer to "Connections" on page 35). Make sure the cable is not bent excessively. • There are no songs in the iPod/iPhone. - Download songs to the iPod/iPhone and connect to this unit. • A sampling rate/bit rate not supported by the unit is used. - Use a sampling rate/bit rate that is supported by the unit. Indication for Flash Memory • Communication error. - Turn the ignition key off, and then set to ON again. - Reset the iPod. - Check the display by reconnecting between the iPod/iPhone and this unit, using the iPod/iPhone cable. • A USB device that is not supported by the unit is connected. - Connect a USB device that is supported by the unit. NO DEVICE • A Flash Memory is not connected. - Make sure the Flash Memory device is correctly connected and the cable is not excessively bent. • No MP3 (file) is stored in the Flash Memory. - Connect the Flash Memory device after storing songs (files). • Caused by the iPod/iPhone Software Version not being compatible with this unit. - Update the iPod/iPhone Software Version to be compatible with this unit. • The iPod/iPhone is not verified. - Reset the iPod. - Try another iPod/iPhone, if available. • A sampling rate/bit rate not supported by the unit is used. - Use a sampling rate/bit rate that is supported by the unit. NO SUPPORT • Text information that is not recognizable by the unit has been input. - Use a Flash Memory device with input text information that is supported by the unit. • Power surge error. Excessive voltage/current is supplied to the iPod/iPhone. - Try another iPod/iPhone, if available. BLUETOOTH mode • The BLUETOOTH device is not connected. - Connect the BLUETOOTH device. • Communication error. - Turn the ignition key off, and then set to ON again. - Check the display by reconnecting between the Flash Memory and this unit. • Power surge error. Excessive voltage/current is supplied to the Flash Memory. - Try another Flash Memory, if available. 31-EN