Alpine CDE-143BT User Manual - Page 10
Initial System Start-Up, Adjusting Volume, Setting Time - clock
View all Alpine CDE-143BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Initial System Start-Up Be sure to press the RESET button when using the unit for the first time, after changing the car battery, etc. 1 Turn off the unit power. 2 Remove the detachable front panel. 3 Press RESET with a ballpoint pen or similar pointed object. Controllable with Remote Control This unit can be controlled with an optional Alpine remote control. For details, consult your Alpine dealer. Point the optional remote control transmitter at the remote-control sensor. Remote control sensor RESET button Adjusting Volume Turn the Rotary encoder until the desired sound is obtained. Setting Time 1 Press and hold AUDIOSETUP for at least 2 seconds to activate the SETUP selection mode. 2 Turn the Rotary encoder to select GENERAL, and then press ENTER. AUDIO GENERAL DISPLAY TUNER SIRIUSXM* iPod BLUETOOTH * Displayed only when a siriusXM Tuner is connected.(CDE-SXM145BT only). 3 Turn the Rotary encoder to select the CLOCK ADJ mode, and then press ENTER. The time indication will blink. 4 Turn the Rotary encoder to adjust the hours while the time indication is blinking. 5 When the hour has been adjusted, press ENTER. 6 Turn the Rotary encoder to adjust the minutes while the time indication is blinking. 7 Press and hold AUDIOSETUP for at least 2 seconds to return to normal mode. Notes • To synchronize the clock to another clock/watch or radio time announcement, press and hold ENTER for at least 2 seconds after setting the "hour". Minutes will reset to "00". If the display shows over "30" minutes when you do this, the time will advance one hour. • Pressing r will return to the previous mode. • Pressing and holding r for at least 2 seconds will return to normal mode. • If no operation is performed for 60 seconds, the unit will return to normal mode automatically. * The illustration is for CDE-SXM145BT/CDE-143BT. Connectable to Remote Control Interface Box With an optional Alpine Steering Wheel Remote Control Interface Box (not included), this unit is controllable from the vehicles steering wheel controls. For details, contact your Alpine dealer. 10-EN