Alpine DPR-RDS1 Owner's Manual (english/french)
Alpine DPR-RDS1 Manual
 |
UPC - 793276401755
View all Alpine DPR-RDS1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Alpine DPR-RDS1 manual content summary:
- Alpine DPR-RDS1 | Owner's Manual (english/french) - Page 1
This Package Contains the Following: REM GND +12V DPR-RDS1 Interface Unit iPod dock cable Antenna Power Harness - Alpine DPR-RDS1 | Owner's Manual (english/french) - Page 2
to the correct FM frequency on which the iPod will be heard. Step 2: Install the DPR-RDS1 in the vehicle 1. Pull vehicle into the service bay. 2. Make sure that the radio code is available before disconnecting the battery. Disconnect both battery terminals. These cables must be disconnected during - Alpine DPR-RDS1 | Owner's Manual (english/french) - Page 3
Install the DPR-RDS1 in the vehicle (continued) 4. You can access the factory antenna port located on the back of the radio. If the factory antenna cable 5. Connect the power/antenna cable and the iPod docking cable to the interface unit. Apply cable ties to secure the cables. 6. Verify that all - Alpine DPR-RDS1 | Owner's Manual (english/french) - Page 4
Using the DPR-RDS1 Select the FM radio source on the radio and tune to the frequency that was selected on the interface unit. As soon as the radio is tuned to the appropriate frequency, audio from the iPod will be heard. About RDS Radios with RDS capability allow the currently playing song title
-
1 -
2 -
3 -
4
 |
 |
+12V
REM
GND
This Package Contains the Following:
DPR-RDS1
Interface Unit
iPod dock cable
Antenna
Power Harness