Alpine DVA-5210 Owners Manual - Page 16

MP3/WMA Selecting Folders Press FOLDER 8 or FOLDER 9 to select the folder. SETUP LIST RETURN :/J g FOLDER 8 FOLDER 9 REPEAT M.I.X. ; 8 : ENT. 9 f Playback The DVA-5210 will play back MP3/WMA files stored on CD-ROMs, CD-Rs, and CD-RWs. The format used must be compliant with ISO 9660 level 1 or level 2. For further information about playing or storing MP3/WMA files, refer to pages 16 and 17 before using the unit. A WMA format file that is protected by DRM (Digital Rights Management) cannot be played back on this unit. 1 Insert a disc containing an MP3/WMA file with the label side facing up. To load discs, see "Loading and Unloading Discs" on page 9. Playback starts. The front panel MP3/WMA indicator lights in amber during playback. 2 Press g or f to select the desired track. Returning to the beginning of the current track: Press g. Fast backward : Press and hold g. Advancing to the beginning of the next track : Press f. Fast forward : Press and hold f. 3 To pause playback, press -/J. Pressing -/J again will resume playback. • MP3/WMA playback information (folder no., file no., tag information, etc.) will be displayed on the monitor during playback. • The CD-player can play discs containing audio data, MP3 data and WMA data. • For MP3 discs, some time may be required until playback starts. • Some discs will not play back depending on the writing or MP3 conversion software used for the disc. In that case, try other software. • The unit will fast backward only the current track. • No sound is output during fast forward/fast backward. Playing MP3/WMA Data The unit can be set to play only the audio data or only the MP3/WMA files on discs containing both audio data and MP3/WMA data (when using discs containing both audio data and MP3/WMA data). 1 Press SETUP before inserting a disc. The setup menu appears on the monitor screen. LS E T U P DVD SETUP L ANGUAGES TV SCREEN COUNTRY CODE PARENTAL P L A Y MODE D I G I TA L OUT CUS TOM S E T UP : 16 : 9 6869 OFF : CD - DA AUTO : 2 Press 8 or 9 to select "PLAY MODE". 3 Press ;, : or ENT. to select CD-DA or MP3/WMA. CD-DA: Plays only audio data on discs containing both audio data and MP3/WMA data. The initial setting at the factory is CD-DA. MP3/WMA: Plays only MP3/WMA files on discs containing both audio data and MP3/WMA data. 4 Press SETUP. The settings are stored and the setup mode is deactivated. • If a disc has already been inserted, perform the setting after you remove the disc. 15-EN