Alpine DVA-5210 Owners Manual - Page 34

System Example Precautions when Making System Upgrades • After connections are completed, it will be necessary to change the system settings of the DVA-5210. Before installing the product, please see "Setting the System Switch" on page 32 and "Setting the Ai-NET" on page 21. • When connecting the DVA-5210 to a head unit or Ai-NET compatible AV head unit, do not connect the switched (ignition) power lead. • When connecting the DVA-5210 to an Alpine TV monitor and Ai-NET compatible AV head unit together, the remote control input cable (white/brown) of both units must be connected. Failing to do so will result in a loss of remote control operation. When making connections to another brand of TV monitor, please use the optional remote control sensor unit. Connecting a non Ai-NET compatible Head Unit, Digital Audio Processor (PXA-H700, PXA-H900, etc.) and TV Monitor DVD Player DVA-5210 System Switch 1 2 Digital Output Terminal (Optical) Fiber Optic Cable Digital Input Terminal (Optical) (for DVD Player) Head Unit non -compatible Ai-NET (Sold Separately) RCA Extension Cable Digital Audio Processor PXA-H700, etc. (Sold Separately) Video Output Connector Remote Turn-On Lead (Blue/White) RCA Extension Cable AUX Video Input Terminal (AUX1) Remote Turn-On Lead (Blue/White) AV-Interface Unit TME-M790, etc. (Sold Separately) Monitor TME-M790, etc. (Sold Separately) Audio Output Connector Only when connecting with rear monitor AUX Audio Input Terminal (AUX1) RCA Extension Cable Remote Control Input Lead (White/Brown) Remote Control Output Lead (AUX1) (White/Brown) Setting of DVA-5210 The DVA-5210's system settings must be made after connections are completed. Before fixing the unit in place, refer to "Setting the System Switch" on page 32 and "Setting the AiNET" on page 21. Setting Item System switch Ai-NET setting Setting 2 (STANDALONE) - • If using in a system with a head unit that is not fully Ai-NET compatible (no processor control) and a digital audio processor, do not connect the head unit's Ai-NET cable. Only connect the DVA-5210 and digital audio processor using an optical fiber cable and its own Ai-NET cable. Use the head unit's analog output (Front or rear) connected to the analog input of the processor. • When connecting only to a digital audio processor (with a non-Alpine head unit or Alpine head unit without Ai-NET), it is possible to use both an optical fiber cable and an Ai-NET output cable. • When connecting another brand of TV monitor, there is no need to connect the remote control input cord (white/brown). Use the optional remote control sensor unit. • Be sure to connect the switched (ignition) power lead. • Also refer to the operating instructions of the other products in the system. Please observe the following when using Fiber Optic Cable. • Do not coil the Fiber Optic Cable smaller than a 30 mm radius. • Do not place anything on top of the Fiber Optic Cable. 33-EN