Alpine DVA-5210 Owners Manual - Page 21

Setting the Digital Output Use the following procedure to set the digital audio signal output from the DVA-5210. Setting item: DIGITAL OUT Setting contents: AUTO / LPCM AUTO: The digital output is switched automatically according to the type of audio signal being played. Be sure to select "AUTO" when you want to connect a digital audio processor and play Dolby Digital audio. "AUTO" is selected upon shipment from the factory. LPCM: The audio signal recorded on the disc is converted to 48 kHz/16 bit (for DVDs) or 44.1 kHz (for video CDs and CDs) linear PCM audio signals for output. • Press RETURN to return to the previous screen. Audio output/Optical digital audio output Disc DVD Video CD CD MP3 WMA Audio recording format DTS Dolby Digital Linear 48kHz/ PCM 16bit 48kHz/ 20bit 48kHz/ 24bit 96kHz/ 16bit 96kHz/ 20bit 96kHz/ 24bit MPEG2 MPEG1 Linear PCM DTS MPEG-1 Audio Layer3 Bit Rate: 32kbps320kbps 32kHz/ 16bit 44.1kHz/ 16bit 48kHz/ 16bit Windows 32kHz/ MediaTM 16bit Audio Bit Rate: 44.1kHz/ 32kbps- 16bit 192kbps 48kHz/ 16bit Digital output setting AUTO LPCM AUTO LPCM AUTO or LPCM AUTO or LPCM AUTO or LPCM AUTO or LPCM AUTO or LPCM AUTO or LPCM AUTO or LPCM AUTO or LPCM AUTO or LPCM AUTO LPCM AUTO or LPCM AUTO or LPCM AUTO or LPCM AUTO or LPCM AUTO or LPCM AUTO or LPCM Optical digital audio output (when a digital audio processor is connected) DTS Elementary Stream LPCM Encode 2ch Down mix (48kHz/16bit) Dolby Digital LPCM (48kHz/16bit) LPCM (48kHz/16bit) LPCM (48kHz/16bit) LPCM (48kHz/16bit) LPCM (48kHz/16bit) LPCM (48kHz/16bit) LPCM (48kHz/16bit) LPCM (48kHz/16bit) LPCM (44.1kHz) LPCM (44.1kHz) DTS Elementary Stream LPCM Encode 2ch Down mix (44.1kHz/16bit) LPCM Encode 2ch (32kHz/16bit) LPCM Encode 2ch (44.1kHz/16bit) LPCM Encode 2ch (48kHz/16bit) LPCM Encode 2ch (32kHz/16bit) LPCM Encode 2ch (44.1kHz/16bit) LPCM Encode 2ch (48kHz/16bit) Analog audio output (Ai-NET, RCA output) OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK Custom Setup SETUP RETURN ; 8 : ENT. 9 Custom Setup Operation The following steps 1 to 5 are common operations to each setting item of CUSTOM SETUP. Refer to each section for details. 1 Press SETUP before inserting a disc, or when in stop mode. The setup menu appears on the monitor. LS E T U P DVD SETUP L ANGUAGES TV SCREEN COUNTRY CODE PARENTAL P L A Y MODE D I G I TA L OUT CUS TOM S E T UP : 16 : 9 6869 OFF : CD - DA AUTO : 2 Press 8 or 9 to select "CUSTOM SETUP," then press : or ENT. 3 Press 8 or 9 to select your desired setting item. CUSTOM SETUP items: Ai-NET SETUP / BEEP / TITLE SCROLL / AUTO SCROLL LS E T U P C U S T OM A I - NET SETUP BEEP T I T L E SCROL L AUTO SCROL L ;R E T U R N FUL L ON TYPE1 AUTO 4 Press ;, : or ENT. to change the setting. 20-EN