Alpine INE-W967HD Owner s Manual english - Page 107

Bluetooth Please connect a Bluetooth audio device. • The Bluetooth audio device was not connected correctly. - Check the settings for the unit and the Bluetooth audio device and reconnect. Unable to download phonebook. • Phonebook failed to read due to mobile phone disconnection, etc. - Check the mobile phone connection, and then conduct synchronizing and adding again. (See page 83) • The connected mobile phone does not support synchronizing of its phone book. - Connect the mobile phone that supports synchronizing the phone book, then synchronize again. (See page 83) HDMI HDMI communication error, Please check your device and try again. • Communication error. - Turn the ignition key off, and then set to ON again. - Check the display by reconnecting between the HDMI and the unit, using the HDMI cable. - Check the display by reconnecting between the HDMI device and the unit. HDMI current error, Please reconnect your device and try again. • Abnormal current is run to the HDMI connector device. - Turn the ignition key off, and then set to ON again. - Disconnect the HDMI device from the unit, and then reconnect it. HDMI monitor communication error. Please check the connection or restart system. • HDMI device communication error. - Turn the engine (ACC) OFF/ON. Or, check the HDMI cable where it connects to the HDMI monitor. Too many monitors are connected to the HDMI output. Please check the connection. • More than 4 HDMI monitors are connected. • A cascade connection using more than 2 distributors is made. - Use one distributor and less than 4 HDMI monitors when connecting. iDataLink CAN Communication error • Communication error. - Check the iDataLink module connection. SiriusXM Check Tuner • The SiriusXM Tuner is disconnected or the unit is having trouble communicating with the Tuner. - Connect the Tuner or check the Tuner connection to the back of the unit. Check Antenna • The SiriusXM Satellite Radio antenna or cable is either damaged or not connected correctly to the SiriusXM Tuner. - Check that the SiriusXM antenna cable is connected to the SiriusXM Tuner and check that the antenna cable is not kinked or otherwise damaged. Replace the antenna if necessary. No Signal • The SiriusXM satellite signal is too weak at the current location. - Move the vehicle to a location with a clear view of the southern sky. - Make sure the Satellite Radio antenna is properly mounted and not obstructed by metal objects. Channel Not Subscribed Call SiriusXM to Subscribe • The active channel has become unsubscribed or the requested channel is not available in your subscription package. - Visit www.siriusxm.com for information on subscribing to this channel. - The unit will revert to the previous selected channel or to channel 1 automatically. Channel Not Available • The active channel is no longer in the SiriusXM channel lineup or the user has entered an invalid channel number. - Visit www.siriusxm.com for information on the current channel lineup. • The unit will revert to the previous channel or to channel 1 automatically. Subscription Updated Press OK to Continue • Your subscription has been updated. - Touch [OK] to clear this message. Channel Locked • A locked channel is selected. - Input the passcode on the number keypad screen, see "Parental Lock Function" (page 68). If wrong passcode is input, "Incorrect Pass Code entered" will be displayed and the unit will revert to the previous channel. Updating The Featured Favorites channels are during updating. Updating Teams, please wait • While the Game table is during updating, the [Game Alert Setup] button in SiriusXM setup mode is touched. Replay Memory Full • Buffer for Replay is full. Replay Memory Near Full • Buffer for Replay will full within 11 seconds. 107-EN