Alpine PSU-300CVC Owners Manual - Page 4
Factory Equipment Removal Process
![]() |
View all Alpine PSU-300CVC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Honda Civic 4/11 Factory Equipment Removal Process 1 Using a panel removal tool release the clips and remove both right and left side covers on the center console. 2 Remove the HVAC control panel by pulling towards the back of the vehicle. 3 Extract (2) Phillips/8mm screws and release the cable clips from under the radio. 4 Disconnect both Gray and Blue connector plugs from under the radio. 5 Release the radio clips by pulling towards the back of the vehicle. Disconnect and remove. 6 Release the clips from the passenger under dash panel and remove it.
![](/manual_guide/products/alpine-psu300cvc-owners-manual-92a5cc3/4.png)
Honda Civic
±
4/11
1
Using a panel removal tool release the clips and
remove both right and left side covers on the center
console.
3
Extract (2) Phillips/8mm screws and release the
cable clips from under the radio.
5
Release the radio clips by pulling towards the back
of the vehicle. Disconnect and remove.
2
Remove the HVAC control panel by pulling towards
the back of the vehicle.
4
Disconnect both Gray and Blue connector plugs
from under the radio.
6
Release the clips from the passenger under dash
panel and remove it.
Factory Equipment Removal Process