Alpine i209-WRA Owners Manual - Page 21
About the Indicator Display, Opening screen Customization, After the update is complete
View all Alpine i209-WRA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
About the Indicator Display The Indicator Bar at the bottom of the screen displays various types of information, like the current time. Lights up when connected to a Bluetooth compatible device. (Does not display when connection is set to OFF.) : Bluetooth connection to audio device : Bluetooth connection to Hands Free Phone Blinks while reconnecting. Indicates the battery level of the connected Bluetooth device*. Battery Level Level 3 Level 2 Level 1 No Battery Icon This may not be displayed depending on the connected Bluetooth device. Whenever one battery level decreases, the alarm sounds. Indicates the signal strength level of the connected Bluetooth compatible device*. Displayed when Bluetooth setting is ON. 0 1 2 3 No Service Plasmacluster indicator Indicates the setting value (Low/Mid/High) selected in "Plasmacluster air volume adjustment." The clock display You can switch between the 12 hour display and 24 hour display options. For details of navigation operations, refer to "Setting the Clock Display" on page 40. Bluetooth devices Name* * When you connect two Hands-Free Phones, the information of the Bluetooth device set to Primary is displayed. Opening screen Customization You can set a BMP image that is stored on a USB flash drive as the opening screen. This setting requires the following image format, folder name and file name. Usable file format: - BMP image - Image size: 800 × 480 pixels (RGB 24 bit or less/number of color bit: 24, 8, 1 bit) - Compression format: non-compressed - Folder name*1: OPENINGFILE - File name*2: openingfile.bmp 1 Connect the USB flash drive to the USB extension cable. A message confirming the opening screen change is displayed. 2 Touch [OK]. An update indicator " (Loading)" is displayed, and update for the opening screen starts. 3 After the update is complete, the following message is displayed.*3 "The logo has been updated successfully! Please remove Flash Memory and press OK." 4 After removing the USB flash drive, touch [OK]. The opening screen setting is complete. *1 Be sure to save the folder to the first layer of the USB flash drive. *2 Only one BMP image can be set as the opening screen. *3 If "Customization failed," is displayed, touch [OK] and then check that the folder name, file name and file format are correct. • Do not perform the following actions during the update. - Do not turn off the ACC to the car. - Do not unplug the USB flash drive. - Do not turn off or operate the unit. • To return the opening screen to its original image, you must Clear All Settings. Be careful of this operation, as your other settings are also initialized. For details, see "Initializing the System" (page 40). 21-EN