Alpine i209-WRA Owners Manual - Page 47
Camera Interrupt Setting (Power OFF Mode) (Rear Camera Only), Setting Multi Camera to On/Off
View all Alpine i209-WRA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
When Hitch Guide is set to On Setting Multi Camera to On/Off When connecting the optional Multi Camera Interface module, you can connect up to 3 cameras as Front Camera/Rear Camera/Side Camera. • When using the optional Multi Camera Interface module, select "Camera Selector" to set the "Front Camera /Rear Camera/Side Camera" to "On" ( )/"Off " ( ). 1 Touch [Link]. The 2 vertical guides of the currently-selected guide link together, allowing them to be adjusted simultaneously. Turning Guide Display On/Off (Rear/Front Camera only) Turning the selected guide off. 1 Touch [On/Off]. The currently selected guide will turn off. 2 To turn the guide on, touch [On/Off] again. • Guides that are turned off are still adjustable. Returning Guides to Default 1 Touch [Default]. A message window will appear. 2 Touch [OK]. Adjusted values will return to default settings. Camera Interrupt Setting (Power OFF Mode) (Rear Camera Only) You can set whether to display the rear camera image when the gear lever is moved to the reverse (R) position while the unit is turned off. You can select this item only when Camera Select is "Rear." Setting item: Camera Interrupt (Power Mode) Setting contents: On (Initial setting) / Off On: The rear camera image is displayed Off: The rear camera image is not displayed Setting item: Front Camera / Rear Camera / Side Camera / Default Camera* Setting contents: Off (Initial setting) / On Camera Signal: See "Setting the Camera Signal Input" (page 45) Guide See "Adjusting the Rear/Front/Side Camera Guide" Adjustment: (page 46) Camera See "Camera Interrupt Setting (Power OFF Mode) (Rear Interrupt Camera Only)" (page 47) (Power Mode): * You can change the Default Camera only when you set more than one camera for Front Camera/Rear Camera/Side Camera to "On." For details, see "Setting a Default Camera" (page 47). Setting a Default Camera When connecting an optional Multi View Camera, you can set which camera image is displayed when you touch the Camera button on the Menu screen or press the (CAMERA) button (i209 only). Setting item: Default Camera Setting contents: Front / Rear / Side • The initial setting differs depending on the cameras set to "On" in "Setting Multi Camera to On/Off." Factory System Setup [Factory System Setup] is selected on the System Setup Menu screen in step 1. See "System Setup" (page 45). 47-EN