Alpine i209-WRA Owners Manual - Page 46

Adjusting the Rear/Front/Side Camera Guide, When Hitch Guide is set to Off

Page 46 highlights

Multi View compatible Front Camera/Rear Camera 2 Touch [Back], [Panorama], [Corner], or [Top]. The view will change to the selected view. • [Back] will not appear for the Front camera. • For an explanation of video patterns, see the camera Owner's Manual. Adjusting the Rear/Front/Side Camera Guide You can adjust the camera guide position. Setting item: Guide Adjustment 1 Touch [Guide Adjustment]. The camera guide adjustment screen is displayed. • If the video pattern is set to "Corner (Rear/Front Camera only)," the camera guide will not be displayed. • When you connect a Multi View compatible camera, select a Video Pattern to make a guide adjustment. • To adjust the guide position of the Rear Camera, touch [Hitch Guide On] or [Hitch Guide Off] to display/hide the Hitch Guide. You can adjust the Hitch Guide to mark the position of the junction between your vehicle and your trailer. • When you connect a Multi View compatible Side Camera, after selecting the Video Pattern, touch [ ] (Left steering) or [ ] (Right steering) to make the guide adjustment that matches the position of the steering wheel in your vehicle. 2 Touch [Adjust]. • If [Adjust] does not appear, proceed to step 3. 3 Touch the guide you intend to adjust. Guide line can also be selected by touching [ ] [ ]. Rear Camera screen example When Hitch Guide is set to Off Front Camera screen example Side Camera screen example 4 Touch or [ ] to adjust the position of the guide. • Touching [Clear] clears adjustments and returns to the setting before guide line alteration. 5 After the adjustment is completed, touch [Set]. Adjusting Guides Simultaneously (for Rear/Side Camera only) 1 Touch [Link]. The 3 vertical guides of the currently-selected guide link together, allowing them to be adjusted simultaneously. When Hitch Guide is set to Off • You cannot adjust the position of the yellow guide line " " in the center independently. It is controlled by a system to be the center of the two yellow guide lines " " and " " on the left and right, or the central green line " " and red guide line " ". When Hitch Guide is set to On • Note on the yellow guide line " " in the center The yellow guide line " " in the center is controlled by a system that locates it in the center of the two yellow guide lines, " " and " " on the left and right, or the green line " " on the top and red guide line " " below. Therefore you cannot move it manually. • You can adjust the Hitch Guide to mark the position of the junction between your vehicle and your trailer. 46-EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101

46
-EN
Multi View compatible Front Camera/Rear Camera
2
Touch
[Back]
,
[Panorama]
,
[Corner]
, or
[Top]
.
The view will change to the selected view.
[Back]
will not appear for the Front camera.
For an explanation of video patterns, see the camera Owner’s Manual.
You can adjust the camera guide position.
Setting item:
Guide Adjustment
1
Touch
[Guide Adjustment]
.
The camera guide adjustment screen is displayed.
If the video pattern is set to “Corner (Rear/Front Camera only),”
the camera guide will not be displayed.
When you connect a Multi View compatible camera, select a
Video Pattern to make a guide adjustment.
To adjust the guide position of the Rear Camera, touch
[Hitch
Guide On]
or
[Hitch Guide Off]
to display/hide the Hitch Guide.
You can adjust the Hitch Guide to mark the position of the
junction between your vehicle and your trailer.
When you connect a Multi View compatible Side Camera, after
selecting the Video Pattern, touch
[
] (Left steering)
or
[
] (Right steering)
to make the guide adjustment that
matches the position of the steering wheel in your vehicle.
2
Touch
[Adjust]
.
If
[Adjust]
does not appear, proceed to step 3.
3
Touch the guide you intend to adjust.
Guide line can also be selected by touching
[
]
[
]
.
Rear Camera screen example
When Hitch Guide is set to Off
You cannot adjust the position of the yellow guide line “
” in
the center independently.
It is controlled by a system to be the center of the two yellow guide
lines “
” and “
” on the left and right, or the central green
line “
” and red guide line “
”.
When Hitch Guide is set to On
You can adjust the Hitch Guide to mark the position of the junction
between your vehicle and your trailer.
Front Camera screen example
Side Camera screen example
4
Touch
[
]
,
[
]
,
[
]
or
[
]
to adjust the position of the
guide.
Touching
[Clear]
clears adjustments and returns to the setting
before guide line alteration.
5
After the adjustment is completed, touch
[Set]
.
Adjusting Guides Simultaneously (for Rear/Side Camera
only)
<Rear Camera>
1
Touch
[Link]
.
The 3 vertical guides of the currently-selected guide link
together, allowing them to be adjusted simultaneously.
When Hitch Guide is set to Off
Note on the yellow guide line “
” in the center
The yellow guide line “
” in the center is controlled by a system that
locates it in the center of the two yellow guide lines, “
” and “
on the left and right, or the green line “
” on the top and red guide
line “
” below. Therefore you cannot move it manually.
Adjusting the Rear/Front/Side Camera Guide