Alpine iDA-X100M Owners Manual - Page 40
Current Error, No Support - ipod connector
UPC - 793276711540
View all Alpine iDA-X100M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Indication for USB memory • Caused by the iPod Software Version not being compatible with this unit. - Update the iPod Software Version to be compatible with this unit. • The iPod is not verified. - Reset the iPod. - Try another iPod. Indication for iPod Mode (Full SpeedTM connection) • The iPod is not connected. - Make sure the iPod is correctly connected (refer to "Connections"). Make sure the cable is not bent excessively. • There are no songs in the iPod. - Download songs to the iPod and connect to this unit. • Communication error - Turn the ignition key off, and then set to ON again. - Check the display by reconnecting between the iPod and this unit using the FULL SPEED™ Connection Cable (KCE-422i). Current Error • Abnormal current is run to the USB connector device (an error message may be displayed if the USB device that is not compatible with the unit is connected). USB memory is a malfunction or it is shorted. - Connect another USB memory. USB Device Error • A USB device that is not supported by the unit is connected. - Connect a USB device that is supported by the unit. No USB Device • A USB memory is not connected. - Make sure the USB memory device is correctly connected and the cable is not excessively bent. • No song (file) is stored in the USB memory. - Connect the USB memory device after storing songs (files). • A sampling rate/bit rate not supported by the unit is used. - Use a sampling rate/bit rate that is supported by the unit. • A copy-protected WMA file was played back. - You can only play back non-copy-protected files. • Caused by the iPod Software Version not being compatible with this unit. - Update the iPod Software Version to be compatible with this unit. No Support • Text information that is not recognizable by the unit has been input. - Use a USB memory device with input text information that is supported by the unit. 38-EN