Amana ASI2575GRW use - Page 4

3. Remove the glass to stop dispensing. A B D C A. Water dispenser lever C. Ice dispenser lever B. Water dispenser spout D. Ice guide The Dispenser Light On some models, the dispenser light will automatically turn on when you use the dispenser. ■■ If you want the light to be on continuously, press the LIGHT ON button. To turn the light back off, press the LIGHT OFF button. The dispenser lights are LEDs that cannot be changed. If it appears that your dispenser lights are not working, see the "Troubleshooting" section for more information. NOTE: Your ice maker has an automatic shutoff. As ice is made, the ice cubes will fill the ice storage bin, and the ice cubes will raise the wire shutoff arm to the OFF (arm up) position. Do not force the wire shutoff arm up or down. Removing and Replacing the Ice Storage Bin: 1. Lift and hold open the ice maker door. 2. Lift the wire shutoff arm so it clicks into the OFF (up) position. Release the ice maker door. 3. Lift up the front of the storage bin and pull it out. 4. Replace the bin by pushing it in all the way, or the dispenser will not work. 5. To restart ice production, lift open the ice maker door and push the wire shutoff arm down to the ON position. The Dispenser Lock The dispenser can be turned off for easy cleaning or to avoid unintentional dispensing by small children and pets. NOTE: The lock feature does not shut off power to the refrigerator, to the ice maker, or to the dispenser light. It simply deactivates the dispenser lever. To turn off the ice maker, see the "Ice Maker and Storage Bin" section. ■■ To lock the dispenser, press LOCK. To unlock the dispenser, press UNLOCK. Ice Maker and Storage Bin ■■ Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced. ■■ The quality of your ice will be only as good as the quality of the water supplied to your ice maker. Avoid connecting the ice maker to a softened water supply. Water softener chemicals (such as salt) can damage parts of the ice maker and lead to poor quality ice. If a softened water supply cannot be avoided, make sure the water softener is operating properly and is well maintained. ■■ Do not use anything sharp to break up the ice in the storage bin. This can cause damage to the ice container and the dispenser mechanism. ■■ Do not store anything on top of or in the ice maker or storage bin. Turning the Ice Maker On/Off Style 1 ■■ To turn on the ice maker, lift open the ice maker door and lower the wire shutoff arm to the ON position. ■■ To manually turn off the ice maker, lift the wire shutoff arm to the OFF (arm up) position and listen for the click. Ice can still be dispensed, but no more can be made. Turning the Ice Maker On/Off Style 2 The On/Off switch is located on the bottom of the Ice Maker, can be accessed by lifting and opening the ice maker door. ■■ To turn on the ice maker, lift open the ice maker door, flip the switch to the ON (right) position. ■■ To manually turn off the ice maker, lift open the ice maker door, flip the switch to the Off (left) position. Ice can still be dispensed, but no more can be made. NOTE: Your ice maker has an automatic shutoff to keep the storage bin from overfilling during normal operation. As ice is made, the ice cubes will fill the ice storage bin, and the ice cubes will raise the shutoff arm to the OFF (arm up) position. When the storage bin is at full capacity, the ice maker will automatically stop ice production, but the ice maker On/Off switch will remain in the On (up) position. 4