Apple M8799LL Setup Guide - Page 21

If you don't want to enter the MAC address manually, click Select to scan for base stations in range of your computer and select the base station you want to use as the main base station. last Stltion o Oltk the: butot ns below to set up or mue chAnges 10 your AirPort bse Stltion. ---1 AirPort Internet Network Port MApping To configure or chlf'l9t advanced sellings. click Show All Settings. fS! Allow wireless clients on this but staUon Clkk the St:lut bunon 10 sun fcw bia'. sutktns �nd wlt.ten IMtwotIt, In liang. of your compvter whkh you un Ula iI. it WOS main bAs. .�tion. Main AirPort 10: 00 03 93:1:8:41 f3 Show Summ.ry Name lnd Pusword Internet Connection ... • A nuln bIH: mdon ,,, connt.cud to 1M: Int., , and sNIt, III c.onMCtion with remot_ and r.lay bue SWIOM. • A ,.moe. bllSt "atton shAlt, 11M m. but sUtlon', Internet connKIlon. • A rtl.ly bas. sc.Jon I, «nnead 10 fhI: nWn bu. llaUon and � its 'ntetntt connection with remote and other Ally NIt ,ullons 8 Click Update to transfer the settings to the base station. To set up a relay base station to connect to the main base station and share its connection with additional remote base stations: If you want to set up a relay base station in the WDS to share its connection with other remote base stations and wireless clients, use the AirPort Admin Utility again. When you set up a relay base station, you also need to set up at least one additional remote base station to share the relay's connection. Relay and remote base stations need to be on the same channel as the main base station. Before setting up a relay or remote base station, find the channel of the main base station in the AirPort pane of AirPort Admin Utility. Click the AirPort status menu in the menu bar to join the wireless network created by the base station you want to set up as the relay base station. 2 Open AirPort Admin Utility (in Applications/Utilities), select the relay base station, and click Configure. If the base station is using the default password of public, you will not be prompted for a password. 3 Enter the same network password as the main base station, if necessary. 4 Click Show All Settings. 5 Click WDS and select the "Enable this base station as a WDS" checkbox, and choose "relay base station" from the pop-up menu. Chapter 3 Using Your AirPort Extreme Base Station