Apple M8840LL/A Setup Guide - Page 19
For more information about using your computer on a network or setting up a network, see
UPC - 718908440841
View all Apple M8840LL/A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Check the documentation accompanying the modem to see if it needs to be plugged into a power outlet. Also look for instructions about installing modem software and connecting the modem to a telephone line. Warning Disconnect your modem from the phone jack during lightning or thunder storms. This will prevent a destructive voltage overload from damaging the modem. More information about the optional internal modem is available in the electronic documentation that came with your computer. Connecting to an Ethernet Network The computer comes with a built-in 10/100 twisted-pair Ethernet port, which extends your computer's features by giving you access to the services and resources provided on a 10 megabit (Mbit) or 100 Mbit Ethernet network. Your computer alone lets you store, retrieve, and modify information on hard disks, removable media disks, and CD-ROM or DVD-ROM discs. On a network, you can also store and retrieve information on other computers, access information that other people have stored for you, use electronic mail, share resources such as printers and modems, and access the Internet, if the network has a link to it. (Access to the Internet over a network may be noticeably faster than access with a modem.) If you're connecting to an existing network, you may be able to get information about the network and the software you need to use it from the specialist-referred to as the "network administrator"-who oversees its operation. Identify your organization's network administrator before you begin. Note: When connecting to a 10/100Base-TX network, use category 5 or 6 twisted-pair cable. When connecting to a 10Base-T network, you can use category 3, 5, or 6 twisted-pair cable. For more information about using your computer on a network or setting up a network, see the electronic documentation that came with your computer. Connecting to a 10/100 Twisted-pair Ethernet Network You can connect directly to a 10/100 twisted-pair Ethernet network before or after you start up the computer. You can also connect your computer to an Ethernet network that uses thin coaxial cables. To do this, you need an RJ-45-to-Thin Coax repeater from a manufacturer other than Apple. See your Apple-authorized dealer for more information on Apple Ethernet media adapters. Setting Up 19