Ariens Deluxe 30 Owners Manual - Page 12
Discharge Chute Ring, Socket Extension Optional - cover
View all Ariens Deluxe 30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
3 1 2 3 5 2 1 2 3 5 4 4 1. Mounting Holes 2. Discharge Chute 3. Chute Pedestal 4. Discharge Chute Ring 5. Mounting Hardware Figure 12 4. Remove the gear cover from top of chute pedestal. 5. Release the lock arm on the gear assembly with your finger and rotate the discharge chute so it points straight ahead. NOTICE: Make sure alignment markers on gear assembly are lined up when discharge chute is pointing straight ahead. 6. Remove rubber grommet from control panel. 7. Make sure the chute control cable is routed between the lower handlebar and the bottom of the control panel, insert control assembly into slot in control panel from below and install assembly into nylon bushing in control panel. See Figure 13. 8. Reinstall rubber grommet over control assembly knob and into control panel. 1 1. Control Assembly 2. Nylon Bushing 3. Push Nut 4. Socket Extension (Optional) 5. Socket, 3/4" Figure 13 EN - 12