Ariens Hydro Pro 28 Owners Manual - Page 32

TROUBLESHOOTING, Does not, operate in, Forward, Reverse., Unit throws, snow poorly or, does not throw

Get Ariens Hydro Pro 28 PDF manuals and user guides View all Ariens Hydro Pro 28 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTION Does not operate in Forward / Reverse. 1. Slack in traction cable. 2. Traction belt not functioning. 3. Speed selector not adjusted properly. 4. Transmission is bypassed. 1. Loosen jam nut on cable, remove slack from cable, tighten jam nut. 2. Repair or replace traction drive belt. See Traction Drive Belt Replacement on page 28. 3. Adjust speed selector. See Speed Selector Adjustment on page 25. 4. Verify bypass rod is pushed fully forward into the frame (see Moving The Unit With the Engine Off on page 15). Unit throws snow poorly or does not throw snow. 1. Shear bolts broken. 2. Attachment clutch/brake not adjusted properly. 3. Impeller is frozen in place. 4. Ice or debris is obstructing auger. 5. Attachment drive belts slipping, worn or damaged. 1. Replace shear bolts (see Shear Bolts on page 23). 2. Adjust attachment clutch/brake (see Attachment Clutch/Brake Adjustment on page 25). 3. Move unit to a warm place to thaw. 4. With the engine off and auger disengaged, check for obstructions and remove. 5. Adjust or replace attachment drive belts (see Attachment Drive Belts Replacement on page 27). EN - 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
EN - 32
Does not
operate in
Forward /
Reverse.
1. Slack in traction cable.
2. Traction belt not
functioning.
3. Speed selector not
adjusted properly.
4. Transmission is bypassed.
1. Loosen jam nut on cable, remove
slack from cable, tighten jam nut.
2. Repair or replace traction drive
belt.
See Traction Drive Belt
Replacement
on page 28
.
3. Adjust speed selector.
See
Speed Selector Adjustment
on
page 25
.
4. Verify bypass rod is pushed fully
forward into the frame
(see
Moving The Unit With the Engine
Off
on page 15).
Unit throws
snow poorly or
does not throw
snow.
1. Shear bolts broken.
2. Attachment clutch/brake
not adjusted properly.
3. Impeller is frozen in place.
4. Ice or debris is obstructing
auger.
5. Attachment drive belts
slipping, worn or damaged.
1. Replace shear bolts
(see Shear
Bolts
on page 23).
2. Adjust attachment clutch/brake
(see Attachment Clutch/Brake
Adjustment
on page 25).
3. Move unit to a warm place to
thaw.
4. With the engine off and auger
disengaged, check for
obstructions and remove.
5. Adjust or replace attachment
drive belts
(see Attachment Drive
Belts Replacement
on page 27).
TROUBLESHOOTING
PROBLEM
PROBABLE CAUSE
CORRECTION