Ariens Max Zoom 48 Owners Manual - Page 18
Moving The, Unit With The, Engine Off, For Best Performance, Important, Warning
View all Ariens Max Zoom 48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
MOVING THE UNIT WITH THE ENGINE OFF IMPORTANT: Never tow unit. 1. Shut OFF engine. 2. Place seat in the service position (See Service Position on page 20). 3. Pull the right and left bypass levers to the neutral position. WARNING: Do not bypass transmission when on a slope. 4. Disengage parking brake. 5. Push unit to desired location. 6. Engage parking brake. 7. Push the right and left bypass levers to the drive position. FOR BEST PERFORMANCE Cut grass when it is dry. Keep mower blades sharp. Keep mower deck properly levelled. Adjust anti-scalp rollers to prevent scalping. Do not set height of cut too low. For very tall grass, mow twice. Do not travel too fast. Mow with the engine set at full throttle. When mulching, only remove 1/3 of grass length per cutting. Do not cut more than 1 inch (2.54 cm) at any one time. Discharge clippings into areas already cut. Vary cutting pattern with each mowing. Do not allow grass or debris to collect inside of mower deck. Clean after each use. Push Lever In to Drive Position Pull Lever Out to the Neutral Position OF4105 OF4110 Figure 5 GB - 18