Ariens Path-Pro 136 Owners Manual - Page 17
MAINTENANCE SCHEDULE, Interval, Action
View all Ariens Path-Pro 136 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
MAINTENANCE SCHEDULE WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding. IMPORTANT: Proper maintenance can prolong the life of unit. The following chart shows the recommended service schedule. Interval Each Use Every 10 Hours As Needed Task Clean unit. Check engine oil. Follow engine maintenance schedule. Check fasteners. Check auger paddle wear. Check scraper blade wear. Check belt wear. Replace scraper blade. Action Remove snow and debris with a soft-bristled brush. Do not use harsh abrasives or cleaners. NOTICE: Protect painted surfaces with automotive-type wax. See Engine Oil on page 12. Perform scheduled engine maintenance. Refer to Engine Manual for detailed instructions. Check all fasteners. Replace missing or damaged fasteners. Tighten all nuts and bolts to correct torque values. Replace when auger paddles are worn to wear indicator holes. See Replace Auger Paddles on page 14. Do not allow scraper blade to wear down too far or auger housing will become damaged. See Replace Scraper Blade on page 15. Adjust auger cable as needed. Replace when damaged or when auger stops or stutters during operation. See Replace Belt on page 15. Replace when damaged or when scraper blade has been adjusted down as far as possible and does not touch surface or clear properly. See Replace Scraper Blade on page 15. EN - 17