Ariens Zoom 42 Operation Manual - Page 10

Check Tire Pressure, Level Mower Deck, Fill Fuel Tank, Check Safety Interlock System

Page 10 highlights

Check Tire Pressure CAUTION: Avoid injury! Explosive separation of tire and rim parts is possible when they are serviced incorrectly: • Do not attempt to mount a tire without the proper equipment and experience to perform the job. • Do not inflate the tires above the recommended pressure. • Do not weld or heat a wheel and tire assembly. Heat can cause an increase in air pressure resulting in an explosion. Welding can structurally weaken or deform the wheel. • Do not stand in front or over the tire assembly when inflating. Use a clip-on chuck and extension hose long enough to allow you to stand to one side. See SPECIFICATIONS on page 27. Level Mower Deck See LEVELLING AND ADJUSTING PITCH OF MOWER DECK on page 18. Fill Fuel Tank Fill fuel tank. DO NOT OVERFILL! See FILLING FUEL TANK on page 13. Check Safety Interlock System WARNING: Safety interlock failure and improper operation of unit can result in death or serious injury. Check system before each use to make sure it is functioning properly. See Safety Interlock System on page 12. Check function of all controls See OPERATION on page 12. GB - 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33

GB - 10
Check Tire Pressure
See
SPECIFICATIONS
on page 27.
Level Mower Deck
See
LEVELLING AND ADJUSTING PITCH
OF MOWER DECK
on page 18.
Fill Fuel Tank
Fill fuel tank. DO NOT OVERFILL! See
FILLING FUEL TANK
on page 13.
Check Safety Interlock System
See
Safety Interlock System
on page 12.
Check function of all controls
See
OPERATION
on page 12.
CAUTION:
Avoid injury!
Explosive separation of tire and
rim parts is possible when they
are serviced incorrectly:
Do not attempt to mount a tire
without the proper equipment
and experience to perform the
job.
Do not inflate the tires above
the recommended pressure.
Do not weld or heat a wheel
and tire assembly. Heat can
cause an increase in air
pressure resulting in an
explosion. Welding can
structurally weaken or deform
the wheel.
Do not stand in front or over
the tire assembly when
inflating. Use a clip-on chuck
and extension hose long
enough to allow you to stand
to one side.
WARNING:
Safety interlock
failure and improper operation of
unit can result in death or serious
injury. Check system before each
use to make sure it is functioning
properly.