Ariens Zoom 42 Operation Manual - Page 16
MAINTENANCE SCHEDULE, Interval, Action - battery
View all Ariens Zoom 42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
MAINTENANCE SCHEDULE WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding. Interval Task Action IMPORTANT: Proper maintenance can prolong the life of unit. The following chart shows the recommended service schedule. Refer to the maintenance instructions in the Engine Manual for additional information. NOTE: To have full access to the engine, the seat must be tipped forward (see TIPPING SEAT FORWARD on page 17) and the hood opened (see MOWER DECK REMOVAL AND INSTALLATION on page 18). Check Safety Interlock System WARNING: Safety interlock system failure and improper operation of unit can result in death or serious injury. Test this system each time the unit is operated. If this system does not function as described, do not operate until repairs are made (see Safety Interlock System on page 12). Check Parking Brake Engage parking brake and engage transmission bypass lever (see MOVING UNIT MANUALLY on page 15). Push unit. If unit rolls, contact your Ariens Dealer. Clean Unit Clean engine, battery, seat, mower deck, etc. of all dirt and debris. Do not use solvents, hard cleaners, or abrasives. NOTE: Protect painted surfaces with automotive type wax. IMPORTANT: Do not spray the unit with water, especially when the unit is warm from operation. Water can seep into bearings and damage them. Check Tires Each Use See SPECIFICATIONS on page 27 for correct tire pressure. CAUTION: Avoid injury! Explosive separation of tire and rim parts is possible when they are serviced incorrectly: •Do not attempt to mount a tire without the proper equipment and experience to perform the job. • Do not inflate the tires above the recommended pressure. • Do not weld or heat a wheel and tire assembly. Heat can cause an increase in air pressure resulting in an explosion. Welding can structurally weaken or deform the wheel. • Do not stand in front or over the tire assembly when inflating. Use a clip-on chuck and extension hose long enough to allow you to stand to one side. Check Mower Blades Check for worn or damaged mower blades (see SHARPENING MOWER BLADE on page 20). Follow Engine Manual Maintenance Schedule Perform scheduled engine maintenance. Refer to Engine Manual for detailed instructions. NOTE: To drain the oil, remove oil drain cap and attach the oil drain hose, supplied in the lit pack, to the drain plug. Rotate the drain to the left to allow oil to drain. Turn the drain to the right to close. GB - 16 Oil Drain Plug