Ariens Zoom 42 Operation Manual - Page 17

Interval Task Action Check Keep battery and battery terminals clean (see Cleaning Battery and Battery Battery Cables on page 21). Lubricate Apply grease to zerk (1) on each Unit front wheel 25 Hours or Every Season 1 50 Hours Check Check mower blade mounting hardware and all other fasteners. or Every Fasteners Replace fasteners that are missing or damaged. Tighten all nuts and Season bolts to the correct torque values. Check All Replace worn or deteriorated belts. 100 Hours Belts • Check hydrostatic belt (see REPLACING HYDROSTATIC BELT or Every on page 24 for hydrostatic belt location). Season • Check PTO belt (see REPLACING PTO BELT on page 23 for PTO belt location). Check All Replace worn or improperly functioning PTO cables. Cables SERVICE AND ADJUSTMENTS WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding. TIPPING SEAT FORWARD Put steering levers up and tip seat forward (figure 6). 2 1 1. Seat Tipped Forward 2. Mounting Hardware Figure 6 SEAT ADJUSTMENT 1. Tip the seat forward. 2. Loosen mounting hardware and slide seat forward or backward to desired position. Tighten mounting hardware (figure 6). 3. Tip seat back. GB - 17