Asko D5424 User manual 8090770 Asko D5424 EN - Page 16
Select options, Press Start, After dishwashing
View all Asko D5424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Dishwashing 6Select options To select an option, press one of the option buttons. The field next to the button lights when the option is activated. The available options depend on the selected program. Once you have started the program, the options you selected are saved for the next time you use the same program. High temperature Activate this option for improved dishwashing results. The machine then uses a higher temperature for the main wash. If you want to use the lower temperature, press until the field next to the button turns off. You can vary the temperature as shown below: Heavy wash: 130 °F (55 °C)/ 160 °F (70 °C) Normal wash: 130 °F (55 °C)/ 150 °F (65 °C) Daily wash: 140 °F (60 °C)/ 150 °F (65 °C) Quick wash: 85 °F (30 °C)/ 140 °F (60 °C) Eco wash: 120 °F (50 °C)/ 140 °F (60 °C) Long dry A higher temperature in the final rinse and a longer drying phase improves the drying result if you activate the Long dry option. This causes a slight increase in energy consumption. If you want a program with Short dry, press so that the field next to the button turns off. 7Press Start The display flashes three times with the remaining time to indicate that the program has started. Close the door properly, otherwise the dishwasher will not start. The display indicates if the door is open. NOTE! If the machine does not start within 2 minutes of the last button press, the display returns to showing the last program run. Stopping or changing a program If you want to change programs after starting the dishwasher, open the door then press and hold Stop for five seconds. Add more detergent if the lid of the detergent dispenser has opened. Then choose a new program, press Start, and close the door. Do you want to add more dishes? Open the door. The dishwasher stops automatically. Add the dishes, close the door, and the dishwasher resumes the program. If the dishwasher is turned off using the main power switch or due to a power failure If the program was not finished, the interrupted program resumes when power is restored. NOTE! During drying, the program is interrupted if the power is cut or the door is open for more than 2 minutes. 8After dishwashing Once the program has finished, "End" appears on the display. A buzzer also sounds at the end of the program. See the section Settings, which describes how to change this function. Once the dishwasher has finished, it uses only standby power. Turn off the dishwasher using the main power switch if you want to completely cut the power. Turn off the water supply valve after each use. 16 Customer Care Center 1-800-898-1879 www.askousa.com