Asko D5424 User manual 8090770 Asko D5424 EN - Page 26

Action, Possible causes, Problem - parts

Page 26 highlights

Troubleshooting Problem The dishwasher does not start. 1 minute appears on the display. Water remains in the dishwasher above the filters. Bad odor in dishwasher. The dishes are not dry enough. Possible causes Action You have forgotten to turn on the main Pressing the main power switch. power switch. The door is not properly closed. Check. A fuse/circuit breaker has been tripped. Check. The plug is not plugged into the power Check. outlet. The water supply valve is turned off. Check. Overflow/leaks. Check. A whirring sound (the drain pump) is Turn off the water supply valve. Pull heard from the dishwasher and does out the plug and call the Customer not stop when the main power switch Care Center. is turned off. The program is taking longer than esti- None. Next time the program is run, mated. the corrected time will be displayed. Blocked drain hose. Loosen the drain hose from where it terminates. Check that no debris has clogged the hose. Is the cone-shaped part of the drain boot cut to the maximum size of the fitting where it attaches? Kink in drain hose. Check that the hose is free from kinks and sharp bends. The filters are blocked. Clean the coarse and fine filters. Debris in the drain pump. Clean the drain pump. See the section Care and maintenance instructions. Dirt around the seals and in corners. Clean with dish brush and low foaming cleaner. Low temperature programs have been Run a program with a higher tempera- selected for a prolonged period. ture about once a month. Drying power too low. Activate the Long dry option. The dishwasher is not fully loaded. Fully load the dishwasher. Rinse aid needs topping up or dosage Top up with rinse add or increase the is set too low. rinse aid dosage. See the sections Rinse aid and Settings. Open the door a little once the program has finished. 26 Customer Care Center 1-800-898-1879 www.askousa.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Action
Possible causes
Problem
Pressing the main power switch.
You have forgotten to turn on the main
power switch.
The dishwasher does not start.
Check.
The door is not properly closed.
Check.
A fuse/circuit breaker has been
tripped.
Check.
The plug is not plugged into the power
outlet.
Check.
The water supply valve is turned off.
Check.
Overflow/leaks.
Turn off the water supply valve. Pull
out the plug and call the Customer
Care Center.
A whirring sound (the drain pump) is
heard from the dishwasher and does
not stop when the main power switch
is turned off.
None. Next time the program is run,
the corrected time will be displayed.
The program is taking longer than esti-
mated.
1 minute appears on the display.
Loosen the drain hose from where it
terminates. Check that no debris has
clogged the hose. Is the cone-shaped
part of the drain boot cut to the maxi-
mum size of the fitting where it attach-
es?
Blocked drain hose.
Water remains in the dishwasher
above the filters.
Check that the hose is free from kinks
and sharp bends.
Kink in drain hose.
Clean the coarse and fine filters.
The filters are blocked.
Clean the drain pump. See the section
Care and maintenance instructions.
Debris in the drain pump.
Clean with dish brush and low foaming
cleaner.
Dirt around the seals and in corners.
Bad odor in dishwasher.
Run a program with a higher tempera-
ture about once a month.
Low temperature programs have been
selected for a prolonged period.
Activate the Long dry option.
Drying power too low.
The dishes are not dry enough.
Fully load the dishwasher.
The dishwasher is not fully loaded.
Top up with rinse add or increase the
rinse aid dosage. See the sections
Rinse aid and Settings.
Rinse aid needs topping up or dosage
is set too low.
Open the door a little once the program
has finished.
Customer Care Center
26
1-800-898-1879
www.askousa.com
Troubleshooting