Asko D5536XXLFI Installation instructions EN - Page 11
Step 3. Adjusting The Door Springs
View all Asko D5536XXLFI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
STEP 3. ADJUSTING THE DOOR SPRINGS TYPE A XL = 3-11 kg XXL = 1-9 kg Check that the door is balanced. It should not fall open or snap shut. Adjust as necessary. TYPE A The door springs are on the sides of the dishwasher. If necessary, pull out the dishwasher and adjust the tension of the door springs. A good idea is to try adjusting one side only first. 1. Be sure the door is closed. 2. Grab the front end of the spring and pull it up and forward to release it from the forward mount. 3. Loosen the spring from the rear mount by turning it outwards. TYPE B (SEE PAGE 12) 4. Adjust the spring tension using one of the following methods depending on how much adjustment is needed. If you need to adjust the spring a lot, place the rear mount in another hole. Place the spring further forward to reduce the tension and further back to increase the tension. If you want to make small adjustments to the spring, hold the back end with one hand and turn the forward mount clockwise or counterclockwise one or more times. Turn the mount clockwise to increase spring tension and counterclockwise to reduce spring tension. Reduce spring tension Increase spring tension Reduce spring tension Increase spring tension CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM 11