Asko D5536XXLFI Installation instructions EN - Page 2

INTRODUCTION Read these instructions carefully and completely before you install the machine. The installation should be carried out by a qualified person who is familiar with all local codes and ordinances for electrical and plumbing connections. WHAT YOU NEED TOOLS 1) Phillips No. 2 screwdriver 2) Flat blade screwdriver 3) Torx screwdriver size T 20 4) Adjustable wrenches (if you use copper fittings) 5) Open-ended wrench (1/2˝ [12 mm], 5/8˝ [16 mm] and 1˝ [24 mm]) 6) Tape measure 7) Spirit level 8) Electric drill with 1-1/2˝ drill bit 9) Keyhole saw NOTE: Cosmetic damage must be reported to the ASKO dealer within five days from the date of purchase. As soon as you unpack the dishwasher, thoroughly check it for cosmetic damage. MATERIALS SUPPLIED *1 *7 *2 *8 3 6 45 6x 1-1/2" (38 mm) 2x 3/8" (10 mm) 2x 2x 1" (25 mm) * Only select models. MATERIALS • Minimum 3/8" OD copper tubing of sufficient length for your installation • Shut-off valve and fittings for water supply line AUTOMATIC HIGH LOOP The drain hose is fastened to the back of the machine at the best height. To eliminate potential drain problems, leave this hose in place. 2 CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM