Asko D5536XXLFI Installation instructions EN - Page 16
Step 5. Checking Dishwasher Function And Fit, Step 6. Securing The Dishwasher
View all Asko D5536XXLFI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
STEP 5. CHECKING DISHWASHER FUNCTION AND FIT Test the dishwasher with the Rinse & Hold program. Check that the dishwasher fills and drains properly. Also check that none of the connections leak. Also check that adjacent drawers and cabinet doors can be opened when the dishwasher door is open. STEP 6. SECURING THE DISHWASHER 1. Pull out the upper basket, and the center basket if present, and turn the basket stop on the runner outward. 2. To make more space available when installing the machine, remove the upper and center basket if present. 3. Remove the lower basket. Otherwise it easily rolls out if you need to adjust the dishwasher during installation. 4. Screw the dishwasher to the counter from the inside or to the cabinets on either side. If the counter Alt. 1 Alt. 2 is a hard material, such as marble, screw the dishwasher to the side cabinets. Use the supplied 6 5 plastic spacers when mounting the dishwasher 5 into place! 6 NOTE: When it is not possible to attach the dishwasher to the cabinet or the underside of the counter top, you should install tip guards to prevent the machine from tipping when you open the door. Sold individually. Asko_300 Tip Guards (P/N 441487) 16 CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM