Asko T712C User manual Quick Start Guide T712C EN - Page 20

How to install the stacking kit: 1. Remove the two screws indicated on the back of the washing machine. 4. Fit the plastic cups so that the tabs marked with arrows are against the front of the control panel and side edges and press firmly onto the top of the unit. Then break off the remaining tabs. 2. Secure the anti-tip device using the screws as shown in the picture. 5. Open the knock-out holes on the back of the dryer (if there are any) using a hammer and a screwdriver. Do not remove the knockout pieces, simply bend inward! 3. Attach the plastic cups for mounting the tumble dryer's front feet to the washing machine's top cover. This is essential, as once the tumble dryer's feet are resting in the plastic cups you know the dryer is correctly positioned on the washing machine. Break off tab A on the cup fitted on the right side and tab B on the cup fitted on the left side. Then remove the paper from the self-adhesive surface under the plastic cups. 6. Push the tumble dryer in under the metal angles, keeping the front edge raised 0.5-1" (1-2 cm). 7. Lower the tumble dryer's front feet into the plastic cups and adjust the legs so that the dryer is balanced. B A Custumer Care Center 20 1-800-898-1879 www.askousa.com